User Manual

ManualsBrandsPhilips Manualsaudio & home theatreHTB4150B/12

Before upgrading the firmware to the latest version (v1.22.02)

−

Check the current firmware version of your device first.

−

Follow the below instructions step by step. Otherwise firmware upgrade would

fail and the device may be permanently damaged.

If the current firmware version is v1.19.10 or below:

Upgrade the device to v1.20.00 through USB first:

Use the zip file v1.20.00 and unzip it in USB. Do not rename the folder. Follow

the upgrade procedure mentioned in later pages.

ii)

Double check that firmware version is now v1.20.00 .

After upgrading to v1.20.00, upgrade the set to v1.22.02 through USB:

Use the zip file v1.22.02 and unzip it in USB. Do not rename the folder. Follow

the upgrade procedure mentioned in later pages.

ii)

Double check that firmware version is now v1.22.02 .

If the current firmware version is later than v1.19.10:

Upgrade the set to v1.22.02 through USB.

Use the zip file v1.22.02 and unzip it in USB. Do not rename the folder. Follow

the upgrade procedure mentioned in later pages.

ii)

Double check that firmware version is now v1.22.02

IMPORTANT NOTE for HTB4150B/12, /51, /98

Summary of content (4 pages)

PAGE 1
IMPORTANT NOTE for HTB4150B/12, /51, /98 Before upgrading the firmware to the latest version (v1.22.02) − − Check the current firmware version of your device first. Follow the below instructions step by step. Otherwise firmware upgrade would fail and the device may be permanently damaged. If the current firmware version is v1.19.10 or below: 1. Upgrade the device to v1.20.00 through USB first: i) Use the zip file v1.20.00 and unzip it in USB. Do not rename the folder.
PAGE 2
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to upgrade the firmware of your player. Preparation for firmware upgrade: For upgrade via internet network:  Get your product connected to internet via LAN cable or wireless internet network. For upgrade via a USB flash drive:   A PC with an archive utility that supports the ZIP‐format (e.g. WinZip for Windows).
PAGE 3
6. 7. Follow the instructions on the TV screen to confirm upgrade operation. Once firmware upgrade is complete, your player will automatically turn off to standby mode. Upgrade firmware via USB 1. Download firmware. Click on the Download icon at the top of the screen to download the new firmware package to your computer. 2. Transfer firmware to a USB flash drive. Warning: DO NOT remove the USB flash device during the firmware upgrade procedure.
PAGE 4
3. Perform a factory reset on the player: ‐ From the menu, select [Setup] > [Advanced] > [Restore default settings].