User Manual

4
Step 3: Update electronic
user manual
Warning
Do not switch off the home theater or remove •
the USB fl ash drive during the update.
If a power failure occurs during the update, •
do not remove the USB fl ash drive from the
home theater. The home theater continues the
update as soon as power is restored.
If an error occurs during the update, retry •
the procedure. If the error reoccurs, contact
Philips Consumer Care.
1 Switch on the TV.
2 Connect the USB fl ash drive containing
the downloaded fi le (electronic user
manual) to the USB connector on the
home theater.
3 Press ( Home ).
Make sure that :
there is no disc inside the disc •
compartment of your home theater,
and
the disc compartment is closed.•
4 Press [3], [3], [8] on the remote control.
Follow the instructions on the TV to »
confi rm the update. When complete,
the home theater automatically
switches off and restarts.
If it does not restart automatically,
disconnect the power cord for a few
seconds and then reconnect it.
5 Disconnect the USB storage device from
the home theater.
EN