Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 2 Your SoundBar 4 4 4 5 3 Connect 6 6 Safety Care for your product Care of the environment Help and support Main unit Remote control Connectors MP3 player Connect audio from TV and other devices 6 4 Use your SoundBar 7 7 7 7 7 5 Wall mount 8 6 Product specifications 8 7 Troubleshooting 9 Adjust the volume Choose your sound Auto standby Apply factory settings EN 1
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
Help and support This is CLASS II apparatus with double insulation, and no protective earth provided. Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. e SOUND SETTING • Press to toggle among balance, powerful, and bright sound settings. • Press and hold to turn SURR on or off. f VOLUME + / • Increase or decrease volume. Remote control Main unit This section includes an overview of the main unit. This section includes an overview of the remote control.
c VOLUME +/Increase or decrease volume. d BRIGHT / BALANCE / POWERFUL Select the preset sound setting. b AUX 1 / AUX 2 Connect to an audio output on the TV or other devices. e TREBLE +/- / RESET • Increase or decrease treble. • Reset your treble level to the default settings programmed at the factory. f BASS +/- / RESET • Increase or decrease bass. • Reset your bass level to the default settings programmed at the factory. g Mute or restore volume.
3 Connect This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet. MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player.
4 Use your SoundBar Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press VOLUME +/- to increase or decrease a volume level. • To mute sound, press .
5 Wall mount Note 6 Product specifications •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length / diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 4mm Note •• Specifications and design are subject to change without notice.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Sound No sound from SoundBar speakers. • Connect the audio cable from your SoundBar to your TV or other devices. • Reset your SoundBar to its factory settings.
O O O O O O O O O O O O X O O O O O X O O O O O X O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 – 2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. HTL1100_93_UM_V2.