Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 4 2 Your SoundBar 4 4 5 6 Help and support Safety Care for your product Care of the environment Compliance Main unit Remote control Connectors 3 Connect 6 Placement 6 Connect audio from TV and other devices 7 4 Use your SoundBar 8 8 8 9 9 10 10 10 10 5 Wall mount 11 6 Product specifications 11 7 Troubleshooting 12 Adjust the volume Choose your sound MP3 player USB storage devices Play audio through Bluetooth Auto standby Apply factory settings Update software
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
Compliance This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips.com. 2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome.
• • • AUDIO IN: Lights up when you switch to audio input source (3.5mm jack). USB: Lights up you switch to USB source. Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. • • • • OPT: Switch your audio source to the optical connection. AUX: Switch your audio source to the AUX connection. AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack). : Switch to Bluetooth mode.
3 Connect Connectors This section includes an overview of the connectors available on your SoundBar. This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. a b c Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar. Use the best quality connection available on your TV and other devices. Option 3: Connect audio through analog audio cables Basic quality audio DVD Option 1: Connect audio through a digital optical cable Best quality audio 1 TV 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device.
4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press . • To restore the sound, press again or press +/- (Volume).
Note •• This feature is only applicable to COAXIAL (COAX) and OPTICAL (OPT) sources. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off. Night mode indicator • If night mode is turned on, all the LED indicators light up one by one, with all the LED indicators on for three seconds. Finally the current source indicator stays on.
Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
5 Wall mount Note 6 Product specifications •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. Note •• Specifications and design are subject to change without notice. Amplifier • • • 3.0-3.5mm/0.12”-0.
Main unit •• •• •• • • •• •• Power supply: 100-240 V~, 50-60 Hz Power consumption: 25 W Standby power consumption: ≤ 0.5 W Speaker impedance: 8 ohm (full range) Speaker drivers: 4 x 54.5 mm (2") Dimensions (W x H x D): 865 x 67.8 x 85.5 mm (34.1" x 2.7" x 3.4") Weight: 1.8 kg / 3.96 lbs Remote control batteries • 1 x AAA-R03-1.5 V 7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself.
• • The device is not correctly connected. Connect the device correctly. (see 'Play audio through Bluetooth' on page 10) The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. The connected Bluetooth device connects and disconnects constantly.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license. Other trademarks and trade names are those of their respective owners.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. HTL1190B_12_UM_V1.