Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 3 4 4 4 4 2 Your SoundBar 6 6 6 7 3 Connect 8 Safety Mains fuse Care for your product Care of the environment Help and support Main unit Remote control Connectors Connect audio from TV and other devices 4 Use your SoundBar Adjust the volume Choose your sound MP3 player Auto standby Apply factory settings 8 9 9 9 9 9 9 5 Wall mount 10 6 Product specifications 11 7 Troubleshooting 12 8 Notice 13 13 13 C
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. This is CLASS II apparatus with double insulation, and no protective earth provided. Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug.
• find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Philips Consumer Care in your country. Before you contact Philips, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Remote control This section includes an overview of the remote control. a Main unit This section includes an overview of the main unit. j AUX COAX b i AUDIOIN OPTICAL c TREBLE d h g a BASS VOLUME b a SURR indicator Lights up when you select Virtual Surround sound.
d TREBLE +/Increase or decrease treble. Rear connectors e SURR Toggle between stereo and virtual surround sound. f Mute or restore volume. g BASS +/Increase or decrease volume. h VOLUME +/Increase or decrease volume. i AUDIO-IN Switch your audio source to audio input connection (3.5mm jack). j AUX Switch your audio source to the AUX connection. Connectors This section includes an overview of the connectors available on your SoundBar. Side right a a AUDIO-IN Audio input from an MP3 player (3.
3 Connect Option 2: Connect audio through a digital coaxial cable This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Best quality audio Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
4 Use your SoundBar Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press VOLUME +/- to increase or decrease a volume level. • To mute sound, press (MUTE).
5 Wall mount Note •• Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3 - 3.
6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 40W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 650 mV • AUDIO-IN: 400 mV Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK Main unit •• •• •• • • •• •• Power supply: 220-240 V~, 50 Hz Power consumption: 40 W Standby power consumption: ≤ 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Sound No sound from SoundBar speakers. • Connect the audio cable from your SoundBar to your TV or other devices. • Reset your SoundBar to its factory settings.
8 Notice This section contains the legal and trademark notices. Compliance This product complies with the radio interference requirements of the European Community. Trademarks Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTL2100_12_UM_V4.
