Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 3 2 Your SoundBar 4 4 4 5 Help and support Safety Mains fuse (UK only) Care for your product Care of the environment Main unit Remote control Connectors 3 Connect 6 Connect audio from TV and other devices 6 4 Use your SoundBar 7 7 7 7 7 8 8 8 5 Wall mount 8 6 Product specifications 9 Adjust the volume Choose your sound MP3 player USB storage devices Auto standby Apply factory settings Update software 7 Troubleshooting 10 8 Notice 10 EN 1
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. This section includes an overview of the remote control. a Main unit This section includes an overview of the main unit. a Remote control b a SURR indicator Lights up when you select Virtual Surround sound. b Source indicators Source indicator lights up when a source is selected.
e USB Switch your audio source to the USB connection. f / Skip to the previous or next track, chapter or file. g TREBLE +/Increase or decrease treble. a (USB) Audio input from a USB storage device. b AUDIO IN Audio input from an MP3 player (3.5mm jack). Rear connectors h VOLUME +/Increase or decrease volume. i SURR OFF Turn off the virtual surround sound. j SURR ON Turn on the virtual surround sound. k BASS +/Increase or decrease bass. l m Mute or restore volume. Start or resume play.
3 Connect Option 2: Connect audio through a digital coaxial cable This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Good quality audio Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
4 Use your SoundBar Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 This section helps you use the SoundBar to play audio from connected devices. Press TREBLE +/- or BASS +/- to change the frequency. »» All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support.
Note •• This product may not be compatible with certain types 5 Wall mount of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 500mA.
6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 40 W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 650 mV • AUDIO-IN: 400 mV Main unit •• •• •• • • •• •• Power supply: 110-240 V~, 50-60 Hz Power consumption: 40 W Standby power consumption: ≤ 0.5 W Speaker impedance: 8 ohm (full range) Speaker drivers: 4 x 54.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the 8 Notice This section contains the legal and trademark notices. product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Specifications are subject to change without notice 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. HTL2101A_05_UM_V3.