Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 2 Your SoundBar 4 4 4 5 Safety Care for your product Care of the environment Help and support Main unit Remote control Connectors 3 Connect 6 Connect audio from TV and other devices 6 4 Use your SoundBar 7 7 7 7 7 8 8 5 Wall mount 8 6 Product specifications 9 Adjust the volume Choose your sound MP3 player USB storage devices Apply factory settings Update software 7 Troubleshooting 10 EN 1
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
Help and support This is CLASS II apparatus with double insulation, and no protective earth provided. Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Remote control This section includes an overview of the remote control. a Main unit o This section includes an overview of the main unit. n b c m d e f l a b a SURR indicator Lights up when you select Virtual Surround sound. b Source indicators Source indicator lights up when a source is selected.
f / Skip to the previous or next track, chapter or file. g TREBLE +/Increase or decrease treble. b AUDIO IN Audio input from an MP3 player (3.5mm jack). Rear connectors h VOLUME +/Increase or decrease volume. i SURR OFF Turn off the virtual surround sound. j SURR ON Turn on the virtual surround sound. k BASS +/Increase or decrease bass. l m Mute or restore volume. Start or resume play. n AUDIO IN Switch your audio source to audio input connection (3.5mm jack).
3 Connect Option 2: Connect audio through a digital coaxial cable This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Good quality audio Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
4 Use your SoundBar Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 This section helps you use the SoundBar to play audio from connected devices. Press TREBLE +/- or BASS +/- to change the frequency. »» All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support.
Note •• This product may not be compatible with certain types 5 Wall mount of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 500mA.
6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 40 W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 2 Vrms • AUDIO-IN: 1 Vrms Main unit •• •• •• • • •• •• Power supply: 110-240 V~, 50-60 Hz Power consumption: 40 W Standby power consumption: ≤ 0.5 W Speaker impedance: 8 ohm (full range) Speaker drivers: 4 x 54.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. HTL2101X_78_UM_V1.