Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 3 3 4 4 2 Your SoundBar 5 5 5 5 6 3 Connect 7 7 Help and support Safety Care for your product Care of the environment Assemble your Soundbar Main unit Remote control Connectors Placement Connect audio from TV and other devices 7 4 Use your SoundBar 9 9 9 9 9 10 10 10 5 Wall mount 11 6 Product specifications 12 7 Troubleshooting 13 8 Notice 14 14 14 Adjust the volume Choose your sound MP3 player USB stor
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support Philips provides extensive online support. Visit our website at www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. • AUDIO-IN: Lights up when you switch to the audio input source. f SURR Lights up when you select Virtual Surround sound. g Bluetooth Lights up when you switch to the Bluetooth mode. Assemble your Soundbar Assemble your SoundBar as described in the quick start guide (Step 1).
a (Standby-On) Switch the SoundBar on or to standby. Top connectors b COAX Switch your audio source to the coaxial connection. c USB Switch your audio source to the USB connection. d OPTICAL Switch your audio source to the optical connection. a a b (USB) Audio input from a USB storage device. e Bluetooth Switch to Bluetooth mode. b AUDIO-IN Audio input from an MP3 player (3.5mm jack). f TREBLE +/Increase or decrease treble. Rear connectors g SURR Toggle between stereo and virtual surround sound.
3 Connect This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers.
• The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cables Basic quality audio 1 Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device.
4 Use your SoundBar Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 This section helps you use the SoundBar to play audio from connected devices. Press TREBLE +/- or BASS +/- to change the frequency. »» All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value. Before you start • Make the necessary connections described in the quick start guide or download the user manual from www.philips.com/ support.
Note •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 500mA.
5 Wall mount Note •• Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3 - 3.
6 Product specifications Bluetooth •• •• Bluetooth profiles: A2DP Bluetooth version: 2.1 + EDR Main unit Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 60W RMS (+/- 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
8 Notice This section contains the legal and trademark notices. Compliance This product complies with the radio interference requirements of the European Community. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www. philips.com/support.
Philips Consumer Lifestyle B.V. 2012/10 15 (Document No.) (Year, Month (yyyy/mm) in which the CE mark is affixed ) EUROPEAN DECLARATION OF CONFORMITY We, PHILIPS CONSUMER LIFESTYLE B.V.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTL2160_12_UM_V3.
