Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 3 2 Your SoundBar 4 4 4 5 Help and support Safety Care for your product Care of the environment Compliance Main unit Remote control Connectors 3 Connect and set up 6 Placement 6 Connect to TV 6 Connect audio from TV and other devices 7 4 Use your SoundBar 8 8 8 9 9 9 10 10 10 5 Update software 11 11 11 6 Wall mount 12 7 Product specifications 12 8 Troubleshooting 13 Adjust the volume Choose your sound Play audio through Bluetooth MP3 player USB storage device
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. a b c d Main unit This section includes an overview of the main unit. e l f g h i a b a • • c d k j (Standby-On/Standby indicator) Switch the SoundBar on or to standby. When the SoundBar is in standby, the standby indicator turns red. (Standby-On) Switch the SoundBar on or to standby.
d • (Play/Pause) Start, pause or resume play in USB mode. e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. g SOUND Select a sound mode. a DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. b AUX IN (L/R) Connect to an analog audio output on the TV or an analog device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. d DC IN Connect to the power supply.
3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate Connect to TV Connect your SoundBar to a TV. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV.
Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Option 2: Connect audio through a digital coaxial cable Good quality audio Note •• When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required.
4 Use your SoundBar • This section helps you use the SoundBar to play audio from connected devices. • Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. • • Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press (Mute).
Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 3.0 + EDR. • The maximum operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
1 Connect a USB storage device to this product. 2 3 Press USB on the remote control. Use the remote control to control play. Button Action Start, pause or resume play. Skip to the previous or next track. During USB play, press repeatedly to select a repeat or shuffle mode, or turn off a play mode. / USB Note •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.
5 Update software To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI. Check software version In HDMI ARC source mode, press TREBLE -, BASS - and - (Volume) on the remote control. 6 7 »» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. Press to start the update.
6 Wall mount Note 7 Product specifications •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. •• Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back.
Main unit •• •• • • •• •• Power supply: • Model (Philips branded AC power adapter): DYS602-210309W; AS650210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.09A Standby power consumption: ≤ 0.5 W Speaker impedance • Woofer: 8 ohm • tweeter: 16 ohm Speaker drivers: 2 x (90mm/3.5" x 34mm/1.3") woofer + 2 x 31mm/1.2" tweeter Dimensions (WxHxD): 843 x 52 x 60 mm Weight: 1.4 kg Subwoofer • • • • Impedance: 3.6 ohm Speaker drivers: 1 x 134 mm (5.
• • When "USB ERROR" is displayed, it indicates that the connected USB device is not supported. When "HDMI ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. Bluetooth A device cannot connect with the SoundBar. • The device does not support the compatible profiles required for the SoundBar. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks o f Koninklijke Philips N.V. and are used by WOOX Innovations L imited under license from Koninklijke Philips N.V. HTL2163B_12_UM_V1.