Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 4 4 4 2 Your SoundBar 5 5 5 6 7 Help and support Safety Mains fuse Care for your product Compliance Care of the environment Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up 7 Pair up with the subwoofer 7 Placement 8 Connect to TV 8 Connect audio from TV and other devices 9 4 Use your SoundBar 10 10 10 11 11 12 12 12 5 Update software 13 13 13 6 Wall mount 14 7 Product specifications 14 8 Troubleshooting 15 Adjust the volume Choose yo
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• temperature matches room temperature before connecting it to the power outlet. Parts of this product can be made of glass. Handle with care to avoid injury and damage. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.).
2 Connect the brown wire to the terminal marked L or colored red. 3 Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or green and yellow). Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable and not just over the two wires in the cable. Copyright in the U.K. Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/ welcome. Remote control This section includes an overview of the remote control. a b Main unit This section includes an overview of the main unit. c d e l f g h a b a c d (Standby-On/Standby indicator) • Switch the SoundBar on or to standby. • When the SoundBar is in standby, the standby indicator turns red.
c d OPTICAL: Switch your audio source to the optical connection. Connectors / (Previous/Next) Skip to the previous or next track in USB mode. This section includes an overview of the connectors available on your SoundBar. • (Play/Pause) Start, pause or resume play in USB mode. a e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. g SOUND Select a sound mode. b c d h SURROUND ON/OFF Select surround or stereo sound.
Wireless subwoofer The SoundBar comes with a wireless subwoofer. 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see a CONNECT (connect) Press to to enter the pairing mode for the subwoofer. b Subwoofer indicator • When the power is turned on, the indicator lights up.
3 4 On the remote control, within six seconds press twice then BASS + once, and then hold down SURROUND ON. »» If the pairing succeeds, the indicator on the subwoofer lights up white. through your SoundBar. Use the best quality connection available on your SoundBar and TV. »» If the pairing fails, the indicator on the subwoofer blinks white slowly. Your SoundBar supports HDMI with Audio Return Channel (ARC).
Connect audio from TV and other devices Option 2: Connect audio through a digital coaxial cable Best quality audio Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Note •• When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required.
4 Use your SoundBar • • This section helps you use the SoundBar to play audio from connected devices. • Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. • • BALANCED: Experience the original sound of your movies and music, without added sound effects. BRIGHT: Spice up your dull movies and music with added sound effects.
»» When the Bluetooth connection succeeds, BT is displayed on the display panel. Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off. »» If the connection fails, BT on the display panel blinks continuously.
• An MP3 or WMA file on a USB storage device 1 Connect a USB storage device to this product. 2 3 Press USB on the remote control. Use the remote control to control play. Button Action Start, pause or resume play. Skip to the previous or next track. During USB play, press repeatedly to select a repeat or shuffle mode, or turn off a play mode.
5 Update software Volume + once, and then hold down SURROUND ON. »» If an upgrade media is detected, on the TV screen you are prompted to start the update. »» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI.
6 Wall mount 7 Product specifications Note •• Improper wall mounting may result in accident, •• •• injury or damage. If you have any query, contact Consumer Care in your country. Before wall mounting, make sure the wall can support the weight of your SoundBar. Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back.
Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). Remote control batteries • Standby power management • Bluetooth •• •• Bluetooth profiles: A2DP, AVRCP Bluetooth version: 3.0 + EDR Main unit •• •• • • •• •• Power supply: • Model (Philips branded AC power adapter): DYS602210309W; AS650-210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.09A Standby power consumption: ≤ 0.
8 Troubleshoo ting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
between the device and the SoundBar. The connected Bluetooth device connects and disconnects constantly. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. • Turn off Wi-Fi function on the Bluetooth device to avoid interference. • For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
Specifications are subject to change without notice 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. HTL3110B_05_UM_V1.
