Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 3 3 3 2 Your SoundBar 4 4 4 5 6 Help and support Safety Care for your product Care of the environment Compliance Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up 6 Pair up with the subwoofer 6 Placement 7 Connect to TV 7 Connect audio from TV and other devices 7 4 Use your SoundBar 9 9 9 10 10 11 11 11 11 11 5 Update software 12 12 12 6 Wall mount 13 7 Product specifications 13 8 Troubleshooting 14 Adjust the volume Choose your sound Pl
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/support. Main unit Remote control This section includes an overview of the remote control. a b This section includes an overview of the main unit. c d e a b a c d e (Standby-On/Standby indicator) • Switch the SoundBar on or to standby. • When the SoundBar is in standby, the standby indicator turns red.
c / (Previous/Next) Skip to the previous or next track in USB mode. d (Play/Pause) Start, pause or resume play in USB mode. • Connectors This section includes an overview of the connectors available on your SoundBar. g f e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. g SOUND Select a sound mode. h SURROUND ON/OFF Select surround or stereo sound. i AUDIO SYNC +/Increase or decrease audio delay.
Wireless subwoofer The SoundBar comes with a wireless subwoofer. 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Placement TV Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. 1 2 Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual.
Option 1: Connect audio through a digital optical cable Option 3: Connect audio through analog audio cables Best quality audio Basic quality audio 1 TV Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVD 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT.
4 Use your SoundBar • This section helps you use the SoundBar to play audio from connected devices. • Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. • • Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press (Mute).
Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 3.0 + EDR. • The maximum operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. 1 2 3 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on your SoundBar. Press AUDIO IN on the remote control. Press the buttons on the MP3 player to select and play audio files or music. Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work).
5 Update software To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI. Check software version In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence. Update software via USB 1 2 Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device.
6 Wall mount Note 7 Product specifications •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. •• Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back.
Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). 8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. Bluetooth •• •• Bluetooth profiles: A2DP, AVRCP Bluetooth version: 3.0 + EDR Main unit •• •• • • •• •• Power supply: • Model (Philips branded AC power adapter): DYS602-210309W; AS650210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.
Error message is displayed on the display panel. • When "ERROR" is displayed, it indicates that an input audio format is not supported. • When "USB ERROR" is displayed, it indicates that the connected USB device is not supported. • When "HDMI ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. NFC A device cannot connect with the SoundBar via NFC. • Make sure that the device is supported by NFC.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks o f Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. HTL3140B_51_UM_V2.
