Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 2 Your SoundBar 4 4 4 5 Safety Care for your product Care of the environment Help and support Main unit Remote control Connectors 3 Connect 7 Connect to TV 7 Connect digital devices through HDMI 7 Connect audio from TV and other devices 8 4 Use your SoundBar 9 9 9 10 10 11 11 5 Wall mount your SoundBar 12 12 6 Product specifications 13 7 Troubleshooting 14 8 Notice 15 15 15 Adjust the volume Choose your
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. This is CLASS II apparatus with double insulation, and no protective earth provided. Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
2 Your SoundBar • Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. • Main unit This section includes an overview of the main unit. • OPTICAL: Lights up when you switch to optical input source. AUX/Bluetooth: Lights up when you switch to analog input source. Blinks when you switch to Bluetooth mode. COAXIAL: Lights up when you switch to coaxial input source. c Volume indicator/V.
Switch your audio source to the coaxial connection. 1 2 17 3 4 16 Bluetooth 5 15 6 7 14 8 13 9 10 11 12 f MUSIC iLINK Switch your audio source to the MUSIC iLINK connection. g AUTO VOLUME ON/OFF Turn auto volume on or off. h AUDIO SYNC +/Increase or decrease audio delay. i +/- (Volume) Increase or decrease volume. j TREBLE +/Increase or decrease treble. k BASS +/Increase or decrease bass. l V.SURR Toggle between stereo and virtual surround sound. m (Mute) Mute or restore volume.
f DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. Rear connectors g DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. a MUSIC iLINK Audio input from an MP3 player. Bottom connectors g 6 5 4 1 2 3 a HDMI IN 1 Connect to the HDMI output on a digital device. b HDMI IN 2 Connect to the HDMI output on a digital device. c TO TV-HDMI OUT (ARC) Connect to the HDMI input on the TV. d AC MAINS~ Connect to the power supply.
3 Connect • This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. 2 The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual.
Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Note •• When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required. Option 1: Connect audio through a digital optical cable TV Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device.
4 Use your SoundBar Surround sound mode Experience an immersive audio experience with surround sound modes. 1 This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. »» When the V.SURR indicator on the main unit turns off, two-channel stereo sound is on, ideal for listening to music.
Night mode For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT MODE ON/OFF to turn night mode on or off. »» When night mode is turned on or off, V.SURR indicator blinks once. • 1 2 Note •• If auto volume is set to turned on, you cannot enable the night mode. 3 The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
Auto standby When playing media from a connected device, the SoundBar automatically switches to standby if: • no source button is pressed for 30 minutes, and • no audio/video playback is detected from a connected device. Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. 1 Press TREBLE+, VOL-, and BASS+ within three seconds. »» When the factory settings restore is complete, the SoundBar automatically switches off and restarts.
5 Wall mount your SoundBar Before you mount your SoundBar on the wall, read all safety precautions. (see 'Safety' on page 2) Wall mount Note •• Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. •• Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.
6 Product specifications •• •• Dimensions (WxHxD): 1010 x 81 x 154 mm Weight: 3.9 kg Wall mount •• Note •• Specifications and design are subject to change without notice. •• Dimensions (WxHxD): 40 x 100 x 26.5 mm Weight: 0.1 kg/each Remote control batteries • 2 x AAA-R03-1.5 V Amplifier • • • • Total output power: 120W RMS (+/- 0.5 dB, 30% THD) / 96W RMS (+/- 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
8 Notice This section contains the legal and trademark notices. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. Compliance This product complies with the radio interference requirements of the European Community. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Philips Consumer Lifestyle HK-1236- HTL5120/12 Year 2012 ........................................................ (Report No. / Numéro du Rapport) .............................................................................................. (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTL5120_12_UM_V3.