Always there to help you Register your product and get support at www.philips.com/support HTL6140B Question? Contact Philips User manual Manual pengguna 使用手冊 คู่มือผู้ใช้ 사용 설명서 HTL6140B_98_UM_V1.0.
HTL6140B_98_UM_V1.0.
English Contents 1 Important 2 2 2 3 3 2 Your SoundBar 4 4 4 5 6 Help and support Safety Care for your product Care of the environment Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up 6 Pair up with the subwoofer 6 Placement 7 Connect to TV 7 Connect digital devices through HDMI 7 Connect audio from TV and other devices 8 4 Use your SoundBar 9 9 9 10 10 11 11 11 11 12 5 Update software 12 12 12 6 Wall mount 13 7 Product specifications 14 8 Troubleshooting 15 Adj
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. Remove batteries if they are exhausted or if the remote control is not to be used for a long time. Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/support. Main unit Remote control This section includes an overview of the remote control. a b This section includes an overview of the main unit. c d e a b a • • c d e (Standby-On/Standby indicator) Switch the SoundBar on or to standby. When the SoundBar is in standby, the standby indicator turns red.
/ (Previous/Next) Skip to the previous or next track in USB mode. d (Play/Pause) Start, pause or resume play in USB mode. • Connectors English c This section includes an overview of the connectors available on your SoundBar. e BASS +/Increase or decrease bass. f e d c a f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. b g SOUND Select a sound mode. h SURROUND ON/OFF Select surround or stereo sound. a HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV.
Wireless subwoofer The SoundBar comes with a wireless subwoofer. 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
If the pairing fails, repeat the steps above. Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. English 4 TV 1 2 Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.
1 2 3 Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on your SoundBar. Option 2: Connect audio through analog audio cables Connect your SoundBar to TV through HDMI OUT (ARC). • If the TV is not HDMI CEC compliant, select the correct video input on your TV. Basic quality audio On the connected device, turn on HDMICEC operations. For details, see the user manual of the device.
• This section helps you use the SoundBar to play audio from connected devices. • Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. • • Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press (Mute).
Night mode 3 For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT ON/OFF to turn night mode on or off. 4 Note •• If auto volume is set to turned on, you cannot enable the night mode.
3 Tap the NFC device onto the NFC tag of the SoundBar until the SoundBar beeps. • For first time connection, on some mobile devices prompt for pair-up appears, select "YES" for connection. »» When the Bluetooth connection succeeds, BT is displayed on the display panel. »» If the connection fails, BT on the display panel blinks continuously. Select and play audio files or music on your NFC device. • To break the connection, tap again the NFC device onto the NFC tag on the SoundBar.
Apply factory settings You can reset this product to the default settings programmed at the factory. 1 In any source mode, on the remote control press Volume -, BASS -, and TREBLE - in sequence within three seconds. »» When the factory settings restore is complete, the product automatically switches off and restarts. 5 Update software To get the best features and support, update your product with the latest software.
•• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this product. 6 Wall mount Before you mount your SoundBar on the wall, read all safety precautions. English Caution Note •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.
7 Product specifications Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work). Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 320W RMS (+/0.
Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
• For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar. NFC A device cannot connect with the SoundBar via NFC. • Make sure that the device is supported by NFC. • Make sure that NFC is enabled on the device (see the device' s user manual for details). • For pairing, tap the NFC device on the NFC tag of the SoundBar. 16 EN HTL6140B_98_UM_V1.0.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. © 2013 CSR plc and its group companies.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks o f Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. HTL6140B_98_UM_V1.0 HTL6140B_98_UM_V1.0.
