Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 3 2 Your product 4 4 5 6 6 Safety Care for your product Care of the environment Compliance Help and support Main unit Remote control Connectors Wireless subwoofer 3 Connect 7 Pair up with the subwoofer 7 Placement 7 Connect to TV 7 Connect digital devices through HDMI 8 Connect audio from TV and other devices 8 4 Use your product 9 9 9 10 11 11 11 11 11 5 Update software 12 12 12 6 Wall mount 13 7 Product specifications 13 8 Troubleshooting 14 Adjust the volu
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • • Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product.
• find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.
c Remote control This section includes an overview of the remote control. d a / Skip to the previous or next track in Bluetooth mode (for AVRCP-supported Bluetooth devices). Start, pause or resume play in Bluetooth mode (for AVRCP-supported Bluetooth devices). e BASS +/Increase or decrease bass on the main unit. b f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume.
Connectors Wireless subwoofer This section includes an overview of the connectors available on this product. This product comes with a wireless subwoofer. a b c a b d ef a HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV. b HDMI IN Connect to the HDMI output on a digital device. c (SERVICE) Connect a USB flash drive to upgrade software of this product (not for media play). d DC IN Connect to the power supply.
3 Connect This section helps you connect this product to a TV and other devices. For information about the basic connections of this product and accessories, see the quick start guide. Placement Place the subwoofer at least 1 meter (3 feet) away from the main unit, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product.
1 2 Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on this product to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. Note Connect audio from TV and other devices Play audio from TV or other devices through the speakers of this product.
Option 2: Connect audio through analog audio cables Basic quality audio AUDIO OUT L 1 2 R 4 Use your product This section helps you use this product to play media from a wide range of sources. Before you start • Make the necessary connections described in Quick start guide and User manual. • Switch this product to the correct source for the other devices. Using an analog cable, connect the AUDIO IN (3.5mm jack) on this product to the AUDIO OUT connectors (red and white) on the TV or other device.
Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 Press TREBLE +/- or BASS +/- to change the frequency. Synchronize video and sound What you need • A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 4.0. • The maximum operational range between this product and a Bluetooth device is approximately 10 meters (30 feet). 1 If the audio and video are not synchronized, delay the audio to match the video.
Connect Bluetooth via NFC NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones. What you need • A Bluetooth device with NFC function. • For pairing, tap the NFC device on the NFC tag of this product. 1 2 3 3 Press the buttons on the MP3 player to select and play audio files or music.
5 Update software 5 To get the best features and support, update your product with the latest software. Check software version In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence within three seconds. »» The software version number is displayed on the display panel. 6 On the remote control, within 6 seconds press twice then Volume + once, and then hold down MOVIE. »» Then "UPG" (upgrade) is displayed on the display panel.
6 Wall mount Before you mount this product on the wall, read all safety precautions. 7 Product specifications Note •• Specifications and design are subject to change without Note notice. •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.
•• Built-in speakers • 2 x mylar tweeter (25mm/1", 8 ohm) • 4 x racetrack full-range speaker (90mm/3.5" x 27mm/1.1", 8 ohm) for front/surround channel • 2 x racetrack full-range speaker (90mm/3.5" x 27mm/1.1", 16 ohm) for center channel Subwoofer • • • • • • • Power supply: 220-240 V~, 50-60 Hz Power consumption: 60 W Standby power consumption: ≤ 0.5 W Impedance: 3 ohm Speaker drivers: 1 x 203 mm (8") woofer Dimensions (W x H x D): 208 x 301 x 403 mm Weight: 6.
Error message is displayed on the display panel. • When "ERROR" is displayed, it indicates that an input audio format is not supported. • When "ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. Bluetooth NFC A device cannot connect with this product via NFC. • Make sure that the device is supported by NFC. • Make sure that NFC is enabled on the device (see the device' s user manual for details).
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Specifications are subject to change without notice 2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. HTL7140B_12_UM_V3.