Operation Manual

28
1 Connect a 3.5 mm stereo audio cable
(not supplied) from the MP3 LINK jack
on this Home Theatre System to the
‘headphone’ jack on the portable media
player.
2 Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ is displayed.
3 Start play on your portable media player.
To stop play, press • STOP on the
portable media player.
Note
Control playback is only possible on the •
portable media player.
Stop play on the portable media player before
•
you switch to other play media/source.
Play from radio
Check that the FM antenna has been connected
to this Home Theatre System. If not, connect
the supplied FM antenna to the FM75
jack
and fi x its ends to the wall.
Tip
For the best reception, place the antenna away •
from your TV and other sources of radiation.
For even better reception of FM stereo,
•
connect an external FM antenna (not
supplied).
FM (75 Ω)
ANTENNA
1 Connect a USB device to the USB
jack.
2 Press , select [USB], then press OK.
A contents menu is displayed.»
3 Select a fi le to play, then press (Play).
Play starts (see ‘Play music, Play photo, »
Play video’ for details).
To stop play, press •
or remove the
USB device.
Note
If the device does not fi t into the USB jack, •
connect it through a USB extension cable.
Not all digital cameras are supported. Digital
•
cameras that require PC program installation
are not supported.
NTFS (New Technology File System) data
•
format not supported.
Play from portable media
player
Simply connect your portable media player (e.g.
MP3 player) to this Home Theatre System to
enjoy superb sound quality from your music
collections.
MP3
EN