Operation Manual

29
Reinstall all the radio stations
1 Press RADIO.
2 Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are »
replaced.
Note
Check the radio antenna connection if no •
stereo signal is detected or less than 5 stations
are detected during radio installation.
Search and store radio stations
individually
1 Press RADIO.
2 Press / .
It starts searching until a radio station »
is detected.
3 Repeat step 2 until you tune to the radio
station you wish to store.
To fi ne tune the radio frequency, •
press
/ .
4 Press PROGRAM.
The preset station number blinks.»
If no action is carried out within 20 »
seconds after the above step, it exits
the preset mode.
5 Press / (or the Numeric buttons) to
select a preset number to store.
6 Press PROGRAM to confi rm.
First time tuning
When you access radio mode for the fi rst
time, follow the instruction to install the radio
stations.
1 Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is »
displayed.
2 Press (Play).
All detected radio stations are stored.»
Once complete, it tunes to the fi rst »
preset radio station.
To stop auto tuning, press •
.
Note
This Home Theatre System can store up to a •
maximum of 40 radio stations.
If auto installation is not activated or less
•
than 5 radio stations are stored, you will be
prompted to install the radio stations again.
Listen to radio
1 Press RADIO.
2 Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for •
other radio stations remain
unchanged.
Note
If the FM radio station transmits RDS (Radio •
Data System) data, the name of the radio
station is displayed.
English
EN