Operation Manual

39
Picture
No picture.
Ensure that the TV is switched to the •
correct source for this home theatre.
No picture on HDMI connection.
If the connected device is not HDCP-•
compliant, you cannot transmit
pictures through a HDMI connection.
Use composite or component video
connection.
Check if the HDMI cable is faulty. Replace •
a new HDMI cable.
If this happens when you change the •
HDMI video resolution, press HDMI
repeatedly until the picture appears.
No picture on the Component (Y Pb Pr)
connection.
If the HDMI video connection is set to •
[Auto] or [1080p/24Hz], there is no
video output through the component
connection. Change the HDMI video
setting or remove the HDMI connection.
No high-defi nition video signal on the TV.
Make sure that the disc contains high-•
defi nition video.
Make sure that the TV supports high-•
defi nition video.
Sound
No sound.
Make sure that the audio cables are •
connected and select the correct input
source (for example, AUDIO SOURCE,
USB) for the device you want to play.
10 Troubleshooting
Warning
Risk of electric shock. Never remove the •
casing of the product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back or bottom of your product. Write the
numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this home theatre do not
work.
Disconnect the home theatre from the •
socket for a few minutes, then reconnect.
English
EN