Register your product and get support at www.philips.
1 Notice Copyright About Progressive Scan Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features for disc or USB Play from radio Play audio from TV or other devices 6 Change settings Access the setup menu Cha
1 Notice Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. About Progressive Scan Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture.
Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. 3 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www.philips.com/welcome. Main unit 6 When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
e a b v u c • • • f (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency. English Remote control INFO Displays information about what is playing. d g Playback buttons e h SURR (Surround Sound) Control playback. Switches to surround sound or stereo sound. i AUDIO Selects an audio language or channel.
4 Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings. • Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
Note • The composite video cable or connector might be labeled AV IN , VIDEO IN , COMPOSITE or BASEBAND. 5 Use your home theater English Option 2: Connect to the TV through composite video (CVBS) This section helps you use the home theater to play media from a wide range of sources. Before you start TV Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater.
Change surround sound mode Use video options Experience an immersive audio experience with surround sound modes. Access several useful features while viewing video. Note • Available video options depend on the video source. Press SURR repeatedly to cycle through the available surround modes. Button / Option Description MULTICHANNEL STEREO Immersive multi-channel sound for an enhanced movie experience. Two-channel stereo sound. Ideal for listening to music.
Quick skip play to a specific time Access several useful features while audio is played. Quick skip to a specific part of a video by entering the time of a scene. During video play, press INFO. Press the Navigation buttons and OK to select: • [TT Time] : Title time. • [Ch Time] : Chapter time. • [Disc Time] : Disc time. • [Track Time] : Track time. Button Action REPEAT Repeats a track, the entire disc or shuffle tracks. Marks two points within a track for repeat play, or turns off repeat mode.
Change tuning grid In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing tuning grid erases all preset radio stations. Press RADIO. Press . Press and hold until ‘GRID 9’ (50 kHz) or ‘GRID 10’ (100 kHz) is displayed. 1 2 3 Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device . 6 Change settings This section helps you to change the settings of your home theater.
Change video settings 1 2 3 1 2 3 4 Press SETUP. Select [General Setup], then press OK . Select and adjust the following settings: • [OSD Language] : Selects the onscreen display menu language. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [DivX(R) VOD Code] : Displays the DivX VOD registration code for the home theater. Press OK to confirm your choice.
Change preference settings 7 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Press SETUP. Select [Preference Setup], then press OK . Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc.
Product specifications Note • Specification and design are subject to change without notice. Region code The type plate on the back or bottom of the home theater shows which regions it supports Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/ CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: .mp3, .wma • Video: .divx, .
Laser specification • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. 9 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service.
Play Disc cannot be played. • Clean the disc. • Ensure that the home theater supports the disc (see ‘Product specifications’ on page 13). • Ensure that the home theater supports the region code of the DVD. • For DVD±RW or DVD±R, ensure that the disc is finalized. DivX video files cannot be played. • Ensure that the DivX file is encoded according to the ‘Home Theater Profile’ with the DivX encoder. • Ensure that the DivX video file is complete. DivX subtitles do not display correctly.
R radio play program tune tuning grid recycle region code remote control repeat rotate pictures S safety slideshow play musical slideshow software update version sound mode surround troubleshooting T time search video troubleshooting TV audio from TV connect 9 9 9 10 4 13 5 8 8 3 9 12 12 7 8 14 9 14 7, 10 6 U USB play software update 16 EN 9 12
