DVD Home Theater System Quick Start Guide

3
Enjoy
DVD HOME THEATRE SYSTEM HTS3100
HTS3105
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
DVD system
Remote Control
and 2 batteries
User Manual
Composite video
cable
Start disc playback
A Press OPEN CLOSE to open the disc tray.
Load a disc and close the disc tray.
B Playback will start automatically.
C If the disc menu appears, use TS keys
to select an option in the menu and
press PLAY X to start playback.
D Press STOP x to stop playback.
Listen to radio
A Press TUNER.
The display panel will show “AUTO INSTALL
PRESS PLAY”.
B Press PLAY X until “START ...” appears on the
display panel.
All the available radio stations with strong reception
signal will be stored automatically.
C Once complete, use . > keys to select a
preset radio station.
D To delete a preset radio station, hold down STOP
x until “FM/MW X DELETED” appears.
Experience surround sound
A Press SURR to switch between stereo and multi-
channel.
B Press SOUND to select either CONCERT,
DRAMA, ACTION or SCI-FI preset digital sound
effects.
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
Press DISC button on the remote control.
Check the connection to the TV and ensure the plugs are  rmly in place.
No sound.
Adjust the volume.
Check the speaker connections and settings.
Check the audio connections and press SOURCE button to select the correct input source.
The centre and rear speakers operate only in multi-channel surround mode. Press SURR button to select
multi-channel surround output.
The DVD system does not work.
Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again.
1 centre, 2 front, 2 rear speakers
and subwoofer
FM wire antenna
AM/MW loop
antenna
Need help?
User Manual
See the user manual that cames with your Philips DVD System
Online
Go to www.philips.com/support
2005 C Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 246 19811
www.philips.com
Note When you press PLAY button again, the
playback will resume from its last stopped point.
To start playback from the beginning, you have
to press STOP button two times to cancel the
resume mode, then press PLAY button.
Note This feature is only available for the  rst time
setup. If you wish to reinstall all the radio stations, hold
down the PROGRAM button on the remote control.