Register your product and get support at www.philips.
Contents 1 Notice 2 Compliance 2 Mains fuse (UK only) 2 Trademarks 2 2 Important 3 Safety 3 Product care 4 Disposal of your old product and batteries 4 Contact us 4 3 Your SoundBar 5 Main unit 5 Remote control 5 4 Connect your SoundBar 7 Connectors 7 5 Use your SoundBar 8 Before you start 8 Play audio from TV or other devices 8 Adjust the volume 8 Choose your sound 8 Apply factory settings 9 6 Wall mount your SoundBar 9 7 Product specifications 10 1
1 Notice Trademarks Compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/ EC (EMC). Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc.
2 Important Read and understand all instructions before you use your SoundBar. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! •• Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Product care Only use microfiber cloth to clean the product. Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
3 Your SoundBar Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. 1 Main unit 2 1 2 3 4 7 3 a • • (Standby-On) Switch the SoundBar on. When the SoundBar is on standby, the standby indicator is red. 4 6 5 b SOURCE Select an audio source. c +/- (Volume) Increase or decrease volume. d LED indicator Blink when a remote control button is pressed.
c SURROUND • Switch to DVS mode or stereo mode. • Press and hold to set night mode. 1 d TREBLE +/- Increase or decrease treble. e VOL +/- Increase or decrease volume. f BASS +/- Increase or decrease bass. g MUTE 2 Mute or restore volume. Replace battery Warning •• The product/remote control may contain a coin type battery, which can be swallowed. Keep the battery out of reach of children at all times! 3 Caution •• The battery contains perchlorate material, handle it with care.
4 Connect your SoundBar Bottom connectors 1 2 This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of the SoundBar and accessories, see the Quick start guide. 3 Note •• Refer to the type plate at the back or bottom of the product for identification and supply ratings. •• Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
5 Use your SoundBar Choose your sound This section helps you use the SoundBar to play audio from connected devices. This section helps you choose the ideal sound for your video or music. Before you start Change treble or bass Check that you make the necessary connections. Change the high frequency (treble) or low frequency (bass) settings of the SoundBar to suit your video or music. Play audio from TV or other devices Press the Source buttons to select the audio output of the connected device.
Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. In AUX mode, press TREBLE+, VOL-, and BASS+ within three seconds. »» When the restore factory settings process is complete, the standby indicator blinks five times. Your SoundBar automatically switches off and back on again. 6 Wall mount your SoundBar For detailed steps about how to wall mount your SoundBar, refer to Quick start guide.
7 Product specifications Note •• Specification and design are subject to change without notice. Amplifier •• Total output power: 100W RMS (30% THD)/ 75W RMS (10% THD) •• Frequency response: 20 Hz-20 kHz / ±3dB •• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) •• Input sensitivity: • AUX: 1.0 V • MP3 LINK: 0.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. sgptt_1123/05_v1 book1 back page.
