User Manual

ManualsBrandsPhilips ManualsAudioPhilips HTS3544/37

1 of 4

Tip: For more information on

burning software we suggest

you can refer to two popular

burning software programs

www.nero.com

1 Introduction

The upgrade version of this software is Version 00.28.00

This software can be used to upgrade the following Philips DVD Home Theater

Systems:

 HTS3544/37

 HTS3555/37

After you have completed the upgrade procedure, your DVD player will typically

perform better. What improvements are made depends on the upgrade software

you are using as well as the software that your DVD player contained before the

upgrade.

2 Preparations

You will need the following items:

 Personal Computer

 CD-R/RW drive and writing application software

 1x blank CD-R

3 Software Version Verification Procedure

It‟s important to write down the Software Version information of your DVD player

before you start the upgrade procedure. This information is also useful in case

you need to call Philips Customer Care Center.

1. POWER ON the set

2. Press OPEN/CLOSE key to open the disc tray on the remote or on

the set

3. Press DISPLAY on the remote

4 Download Software

1. Click the link to download Firmware upgrade to your PC.

2. Unzip the .zip file

i) Do not rename the filename

ii) Visit http://www.winzip.com/ for downloads if you cannot open the

.zip file.

5 Burning upgrade software on CD-R or CD-RW

1. Extract the files by unzipping the zipped file.

2. Burn the extracted files – not the zip file - onto a blank CD-R or CD-RW disc,

using the following settings:

Summary of content (4 pages)

PAGE 1
Introduction The upgrade version of this software is Version 00.28.00 This software can be used to upgrade the following Philips DVD Home Theater Systems:  HTS3544/37  HTS3555/37 After you have completed the upgrade procedure, your DVD player will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software that your DVD player contained before the upgrade.
PAGE 2
Philips Electronics Singapore Software Upgrade Instruction  File System CD-ROM Joliet  File name length: max 31 chars (ISO Level 2)  Mode: 2/XA  Character set ASCII  Single session  Write speed: Select lowest speed selectable 3. Finalize the disc. (The application may do this automatically.) Using Nero Express 6 Please make sure you are using Nero Express. You can start Nero Express from the Nero folder in Windows Start menu. 1. Insert a blank CD-R or CD-RW disc. 2.
PAGE 3
Philips Electronics Singapore Software Upgrade Instruction 2. Open Easy CD Creator 3. Select the unzipped files from the browser on top. 4. Click “Add” to copy the files below. 5. Select “Record CD” in the „File‟ menu. 6. Click “Start Recording”, the firmware upgrade will now be burned onto the disc. 6 Steps to Upgrade Software 1. Power on the set and put in the disc. 2. A message will be displayed on the OSD after the upgrade file is recognized. 3. After reading the file, the disc will be ejected 4.
PAGE 4
Philips Electronics Singapore 7 Software Upgrade Instruction After the upgrade Do check the change in the Software Version to confirm the upgrade. Please follow the procedure described in the Section 4. Software Version History V00.28.00  Improvement in set playback performance V00.27.00  Fix for intermittent audio signal muted when connected to COAXIAL/ DIGITAL IN V00.24.00   Fix for HDMI video setting with certain models of Philips TVs.