User Manual

Update your software

Philips continually tries to improve its products. To make sure that your product

has the latest features and fixes, update it with the latest software. After you

upgrade your software, you need to reconfigure basic settings for your home

theater. Make sure there is no disc in the tray before you perform the software upgrade

You can get software updates from your dealer or from www.philips.com/support.

In this update

This is a software update for:

 Model: HTS3560, HTS3580

 System software Version: 54

This update addressed the following issues:

 Improved Blu-Ray disc playability

What you need

Before you update the software, make sure that you have the following:

 A USB storage device with about 70 Mbytes of free space. The USB must be FAT or

DOS-formatted. Do not use a USB hard drive for the software update.

 A PC with internet access.

 An archive utility that supports the ZIP file format (for example, WinZip® for Microsoft®

Windows®, or Stufflt® for Macintosh®).

Step 1: Check the current software version

1. Press (Home).

2. Select [Setup], then press OK.

3. Select [Advanced Setup] > [Version Info.], then press OK.

» The software version is displayed.

4. If the software version is lower than System SW: 54, upgrade the software. Otherwise, do not

upgrade.

Model: HTS35XX/xx

Versions

System SW: 54

Subsystem SW: XX-XX-XX-XX

PAGE 1
Update your software Philips continually tries to improve its products. To make sure that your product has the latest features and fixes, update it with the latest software. After you upgrade your software, you need to reconfigure basic settings for your home theater. Make sure there is no disc in the tray before you perform the software upgrade You can get software updates from your dealer or from www.philips.com/support.
PAGE 2
Step 2: Download the latest software 1. Connect a USB storage device to your PC. 2. On your PC, navigate to www.philips.com/support. 3. Find your product and locate the available the software and drivers. 4. If the software version is later than the version on your product, click the software update. 5. Accept the license agreement, and save the ZIP file to the USB storage device. 6. Using the archive utility, extract 'UPG_ALL' to the root directory of the USB storage device. 7.