User Manual

1
4 Save the zip fi le in the root directory of
your USB fl ash drive.
5 Use the archive utility to extract the help
update fi le in the root directory of the USB
fl ash drive.
» A fi le named ‘HTSxxxxeDFU.zip’ is
extracted under the UPG_ALL folder
of your USB fl ash drive, ‘xxxx’ being the
model number of your home theater.
6 Disconnect the USB fl ash drive from your
computer.
Step 3: Update onscreen help
Caution
• Before you connect the USB fl ash drive to
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1 Switch on the TV.
2 Connect the USB fl ash drive containing the
downloaded fi le to your home theater.
3 Press ( Home ).
4 Enter 338 on the remote control.
» Follow the instructions on the TV to
confi rm the update. Do not switch off
the home theater or remove the USB
fl ash drive during the update.
5 Disconnect the USB fl ash drive from the
home theater.
Warning
• If power fails during the update, do not
remove the USB fl ash drive from the home
theater.
• If an error occurs during the update, retry
the procedure. If the error reoccurs, contact
Philips Consumer Care.
Update onscreen help
Philips continually tries to improve its products. To
make sure that your onscreen help is up to date
with the latest information, update your home
theater with the latest onscreen help.
Download the latest help from
www.philips.com/support.
What you need
• A USB fl ash drive, with at least 35MB of
memory. The USB fl ash drive must be FAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
fi le format (for example, WinZip® for
Microsoft® Windows® or Stuffl t® for
Macintosh®).
Step 1: Check the current
version of help
Check the current version of onscreen help
installed in your home theater. If the version is
lower than the version available at www.philips.
com/support, download and install the latest
onscreen help.
The last two digits indicate the version of the
onscreen help installed in your home theater. For
example, if the version in the home theater is
‘Subsystem SW: 35-00-00-05’, ‘05’ represents the
version of the onscreen help currently installed.
1 Press ( Home ).
2 Select [Setup] , and then press OK .
3 Select [Advanced] > [Version Info.] , and
then press OK .
Step 2: Download the latest
onscreen help
1 Connect a USB fl ash drive to your computer.
2 In your web browser, go to www.philips.
com/support.
3 At the Philips support website, fi nd your
product and click on User manuals , and
then locate the User Manual Upgrade
Software .
» The help update is available as a zip fi le.
English
EN