Register your product and get support at www.philips.
1 Notice Copyright Compliance Mains fuse (UK only) Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Connect a Philips Dock for iPod/iPhone 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features Play from radio Play audio from TV or other devices Play from an
1 Notice Copyright 2 3 The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. Refi t the fuse cover. Note • To conform with the EMC directive This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation. HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries. Manufactured under licence under U.S.
• Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Visible and invisible laser radiation when open. Avoid exposure to beam. • Do not touch the disc optical lens inside the disc compartment. Risk of overheating! • Never install this product in a confined space.
Your home theater Remote control English 3 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. 1 2 Main unit 3 4 5 6 23 7 8 22 21 a Disc compartment 20 9 10 b (Open/Close) Opens or closes the disc compartment. 19 c (Play/Pause) Starts, pauses or resumes disc play. 18 d SOURCE 11 Selects an audio/video source for the home theater.
c Audio Source • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio input source. DOCK for iPod: Switches to Philips Dock for iPod/iPhone. • d SETUP Accesses or exits the setup menu. e (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency.
Connect your home theater Back connectors English 4 This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings.
Option 1: Connect to the TV through HDMI Option 3: Connect to the TV through composite video (CVBS) Note TV • The composite video cable or connector might be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. TV Note • If the HDTV has a DVI connector, connect using an HDMI/DVI adapter. • If the TV supports EasyLink HDMI CEC, control the home theater and TV with one remote control (see ‘Use Philips EasyLink’ on page 13).
Note Option 4: Connect audio through an HDMI cable English Option 1: Connect audio through a digital coaxial cable Note • The digital coaxial cable or connector might be labeled COAXIAL DIGITAL OUT or SPDIF OUT. • The HDMI connector on the TV might be labeled HDMI 1 or HDMI ARC. This feature works with Audio Return Channel (ARC) compatible devices only.
5 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater. Choose your sound This section helps you choose the ideal sound for your video or music. Sound mode Description ACTION / ROCK Enhanced low and high-range. Ideal for action movies and rock or pop music.
Press the following buttons to control play: Button Action Navigation buttons OK Navigate menus. / / ZOOM Access several useful features while viewing video. Available video options depend on the video source. Action Searches slow-backward or slow-forward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. AUDIO Selects an audio language or SYNC channel. SUBTITLE Selects subtitle language for video. Displays information about what INFO is playing.
More play features Several advanced features are available for video or picture playback from a disc or USB storage device. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The files must be stored on the same disc or USB storage device. Select a music track, then press OK. Press BACK and go to the picture folder. Select a picture, then press OK to start slideshow. Press to stop slideshow. Press again to stop music.
3 To view video: Connect a video cable from the docking station to the TV. • For iPod, check that the TV ON setting on the player is enabled. • For iPhone, select the TV Out options on the player. • • The home theater can store up to 40 radio stations. • Press to stop the installation. • AM and digital radio are not supported. • If no stereo signal is detected, or if fewer than five stations are found, you are prompted to install the radio stations again.
5 Select and adjust the following settings: [EasyLink] : Enables or disables EasyLink. • [One Touch Play] : Enables or disables One Touch Play. If enabled, you can use the remote control to start disc play in the home theater and the TV switches automatically to the correct channel. • [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices.
Change video settings 1 2 3 1 2 3 Press SETUP. Select [Video Setup], then press OK. Select and adjust the following settings: • [TV System] : Selects a TV system that is compatible with the TV. • [TV Display] : Selects a picture display format to fi t the TV screen. • [Picture Settings] : Selects a predefined color setting. • [HDMI Setup] : Selects HDMI video resolution and the wide screen display format for the TV. The Wide Screen Display option is only available for 16:9 wide screen TV display setting.
Change preference settings 7 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Press SETUP. Select [Preference Setup], then press OK. Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc.
Product specifications Note • Specification and design are subject to change without notice. Region code Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: .mp3, .wma • Video: .avi, .divx, .wmv • Picture: .
Wall Mount • Dimensions (WxHxD): 440 x 60 x 23 (mm) • Weight: 0.54 kg Laser speci cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. 9 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself.
Play No sound from subwoofer In Standby, press and hold (Stop) on the remote control until [PAIRING] flashes on the main unit. Press and hold PAIR on the subwoofer until the blue and green indicators on the subwoofer flash alternately. If the wireless connection succeeds, [PAIR OK] is displayed and the green indicator on the subwoofer lights up. • If the wireless connection fails, [PAIR FAIL] is displayed, and the blue and green indicators on the subwoofer remain lit.
L 10 Index A ampli er audio connection language synchronize with video audio input mapping 17 8 16 12 13 C care change settings connect audio from TV guide other devices TV connectors contact us 4 14 8, 13 7 8 7 7 18 D disc play supported discs disposal of your product DivX registration code subtitle 10 17 4 15 16 E EasyLink settings 13 F le formats 17 H HDMI CEC (see Easylink) 13 I iPod connect play 20 EN 9 13 language audio disc menu on-screen display subtitle 16 16 15 16 M MP3 play 1
S 3 English safety settings general parental control preferences restore factory settings software update version sound mode treble and bass troubleshooting system audio control 15 16 16 16 16 16 10 10 19 13 T time search video troubleshooting TV audio from TV connect 12 18 8, 13 7 U USB play software update 11 16 V video synchronize with audio video on demand (VOD) 12 15 EN 21