Register your product and get support at www.philips.
1 2 3 4 5 6 Notice Copyright About Progressive Scan Trademarks 7 2 2 2 2 Important 3 3 4 4 Safety Product care Disposal of your old product and batteries Update software 16 16 16 Check software version Update software from a CD-R or USB 8 Product specifications 17 9 Troubleshooting 18 10 Index 19 Your home theater 5 5 5 Main unit Remote control Connect your home theater 7 7 7 8 9 Connectors Connect to the TV Connect audio from TV or other devices Connect a Philips Dock f
1 Notice Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. About Progressive Scan Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. CLASS 1 LASER PRODUCT Important Eng lis h 2 Read and understand all instructions before you use your home theater.
•• For speakers with stands, use only the supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on flat, level surfaces that can support the combined weight of the speaker and stand. •• Never place the product or any objects on power cords or on other electrical equipment. •• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. 1 Main unit 3 Eng lis h 3 2 4 5 6 23 7 8 22 21 a Disc compartment 20 9 10 b (Open/Close) Opens or closes the disc compartment. 19 c (Play/Pause) Starts, pauses or resumes disc play. 18 d SOURCE 11 Selects an audio/video source for the home theater.
c Audio Source • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio input source. DOCK for iPod: Switches to Philips Dock for iPod/iPhone. • d e SETUP Accesses or exits the setup menu. (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency.
Connect your home theater Back connectors Eng lis h 4 This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Note •• Refer to the type plate at the back or bottom of the product for identification and supply ratings.
Option 1: Connect to the TV through HDMI Option 3: Connect to the TV through composite video (CVBS) Note TV •• The composite video cable or connector might be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. TV Note •• If the HDTV has a DVI connector, connect using an HDMI/DVI adapter. •• If the TV supports EasyLink HDMI CEC, control the home theater and TV with one remote control (see ‘Use Philips EasyLink’ on page 14).
Note Option 4: Connect audio through an HDMI cable Eng lis h Option 2: Connect audio through a digital optical cable Note •• The digital optical cable or connector might be labeled SPDIF OUT or OPTICAL OUT. (Cable not supplied) •• The HDMI connector on the TV might be labeled HDMI 1 or HDMI ARC. This feature works with Audio Return Channel (ARC) compatible devices only.
5 Use your home theater Change sound mode Select predefined sound modes to suit your video or music. This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: •• Make the necessary connections and complete the setup as described in the Quick Start. •• Switch the TV to the correct source for the home theater. Choose your sound This section helps you choose the ideal sound for your video or music.
The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). Insert a disc into the home theater. Press DISC. »» The disc plays or the disc main menu appears. 1 2 3 Press the following buttons to control play: Button Action Navigation buttons OK Navigate menus. / / ZOOM Confirms an entry or selection. Starts, pauses or resumes play. Stops play. Skips to the previous or next track, chapter or file.
More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The files must be stored on the same disc or USB storage device. Select a music track, then press OK. Press BACK and go to the picture folder. Select a picture, then press OK to start slideshow. Press to stop slideshow. Press again to stop music.
In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing tuning grid erases all preset radio stations. Press RADIO. Press . Press and hold until ‘GRID 9’ (50 kHz) or ‘GRID 10’ (100 kHz) is displayed. 1 2 3 Play audio from TV or other devices Dock your iPod or iPhone 1 2 Connect the dock to the home theater and connect the yellow composite cable from the dock to the TV. For more information, see the Quick Start provided with the dock.
Use Philips EasyLink 6 The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. This section helps you to change the settings of your home theater. Note Caution •• Many of the settings are already configured with the best value for the home theater.
Change video settings 1 2 3 1 2 3 4 Press SETUP. Select [General Setup], then press OK. Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 14). • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play. • [Display Dim] : Changes the brightness of the display panel.
Change preference settings 7 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Press SETUP. Select [Preference Setup], then press OK. Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc.
Product specifications Note •• Specification and design are subject to change without notice. Region code For information about which region this home theater supports, see the type plate on the back or bottom. Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD,Video CD/SVCD, Picture CD, MP3-CD,WMA-CD, DivX-CD, USB storage device File Format •• Audio: .
9 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product.
10 Index A amplifier audio connection language synchronize with video audio input mapping 17 8 16 12 14 C care change settings connect audio from TV guide other devices TV connectors contact us 4 14 8, 13 7 8 7 7 18 D disc play supported discs disposal of your product DivX registration code subtitle 11 17 4 15 16 E EasyLink settings 14 F file formats 17 H HDMI CEC (see Easylink) 14 I iPod connect play 9 13 EN 19 Eng lis h DivX video files cannot be played.
L language audio disc menu on-screen display subtitle S 16 16 15 16 M MP3 play O one-touch play one-touch standby overview connectors main unit remote control P password picture options slide show thumbnail overview troubleshooting play disc MP3 player options radio troubleshooting USB storage device product care product specifications progressive scan 13 14 14 7 5 5 16 11 12, 11 11 18 11 13 11 12 18 11 4 17 2 R radio play program tune tuning grid recycle region code remote control repeat rotat
Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072 中文 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 68
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. sgptt_1039/51_v3 bk.
