User manual

18
The contents of a USB storage device cannot be
read.
Ensure that the format of the USB storage
device is compatible with the home theater
(see ‘Product speci cations’ on page 16 ) .
Ensure that the USB storage device
is formatted with a  le system that is
supported by the home theater (note that
NTFS is not supported).
‘No entry’ or ‘x’ sign appears on the TV.
The operation is not possible.
EasyLink feature does not work.
Ensure that the home theater is connected
to a Philips brand EasyLink TV and that
EasyLink is on .
I do not want my home theater to be switched
on when I switch on my TV.
This is the correct behavior for Philips
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink .
The video (movies, photos, video clips, etc.)
contents of the iPod/iPhone do not display on TV.
Video and photo browsing is not supported,
you can only browse the video and photo
contents on the iPod/iPhone itself.
Cannot see pictures from my iPod/iPhone on the
TV.
Connect a yellow composite cable from the
dock to the TV.
Switch the TV to the •AV/VIDEO source
(corresponding to the yellow composite
cable).
Press •PLAY on the iPod or iPhone to start
the slideshow.
Sound
No sound.
Ensure that the audio cables are connected
and select the correct input source (for
example, AUDIO SOURCE ) for the device
you want to play.
No sound on HDMI connection.
You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
Ensure that the •[HDMI Audio] is enabled .
No sound from TV program.
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV, then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Distorted sound or echo.
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
Audio and video are not synchronized.
1) Press and hold •AUDIO SYNC . 2) Press
+/- within  ve seconds.
Play
Disc cannot be played.
Clean the disc.
Ensure that the home theater supports the
disc (seeProduct speci cations’ on page
16 ) .
Ensure that the home theater supports the
region code of the disc.
For DVD±RW or DVD±R, ensure that the
disc is nalized.
DivX video  les cannot be played.
Ensure that the DivX  le is encoded
according to the ‘Home Theater Pro le’
with the DivX encoder.
Ensure that the DivX video  le is complete.
DivX subtitles do not display correctly.
Ensure that the subtitle  le name is the
same as the movie  le name.
Select the correct character set: 1) Press
SETUP . 2) Select [Preference Setup] .
3) Select [DivX Subtitle] . 4) Select a
supported character set. 5) Press OK .
EN
1_HTS5200_12_EN-US_v3.indd Sec1:18 6/8/2010 1:35:51 PM