Register your product and get support at www.philips.
Register your product and get support at www.philips.
1 Notice Copyright Compliance Mains fuse (UK only) Trademarks 2 Important Safety Product care Disposal of your old product and batteries 3 Your home theater Main unit Remote control 4 Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Connect a wireless module 5 Use your home theater Before you start Choose your sound Play a disc Play from a USB storage device More play features Play from radio Play audio from TV or other devices Play from an MP3 player Us
1 Notice Copyright This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries. HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc.
• Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Visible and invisible laser radiation when open. Avoid exposure to beam. • Do not touch the disc optical lens inside the disc compartment. Risk of overheating! • Never install this product in a confined space.
Your home theater Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. Main unit English 3 a b v c d u e a Disc compartment b (Open/Close) Opens or closes the disc compartment. c (Play/Pause) Starts, pauses or resumes play. d (Stop) • Stops play. • In radio mode, erases the current preset radio station.
d SETUP Accesses or exits the setup menu. e • • • f (Navigation buttons) Navigate menus. In video mode, press left or right to fast backward or fast forward. In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency. INFO Displays information about what is playing. g Playback buttons Control playback. h SURR (Surround Sound) Switches to surround sound or stereo sound. i AUDIO SYNC • Selects an audio language or channel.
Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings. • Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
Option 2: Connect to the TV through Scart Option 1: Connect audio through analog audio cables (Cable not supplied) (Cable not supplied) Option 3: Connect to the TV through composite video (CVBS) Option 2: Connect audio through coaxial cable Note • The composite video cable or connector might be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. (Cable not supplied) Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box.
Use your home theater Change surround sound mode Experience an immersive audio experience with surround sound modes. This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theater. Choose your sound This section helps you choose the ideal sound for your video or music.
Play a disc The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). Insert a disc into the home theater. Press DISC. » The disc plays or the disc main menu appears. 1 2 3 Press the following buttons to control play: Button Action Navigation Navigate menus. buttons OK Confirms an entry or selection. Starts, pauses or resumes play. Stops play. Skips to the previous or next / track, chapter or file.
More play features The home theater is fitted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device. Connect the USB storage device to the home theater. Press USB. » A content browser appears. Several advanced features are available for video or picture playback from a disc or USB storage device. 1 2 3 4 Select a file, then press OK. Press the playback buttons to control play (see ‘Play a disc’ on page 10).
Play from radio Use Philips EasyLink The home theater can store up to 40 radio stations. Check that the FM antenna is connected. Press RADIO. » “AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press . The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLinkcompliant devices that are connected through HDMI connectors can be controlled by a single remote control.
Create MP3 audio les 6 Use the home theater to convert audio CDs into MP3 audio files. Insert an audio CD (CDDA/HDCD) into the home theater. Connect a USB storage device to the home theater. When audio is played, press CREATE MP3. This section helps you to change the settings of your home theater. 1 2 English Change settings Caution • Many of the settings are already configured with the best value for the home theater.
Change general settings • 1 2 3 • 4 Press SETUP. Select [General Setup], then press OK. Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 12). • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play. • [Display Dim] : Changes the brightness of the display panel.
Change preference settings 7 1 2 3 To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. 4 Check software version 1 2 Update software from a CD-R or USB 1 Check for the latest software version on www.philips.com/support. • Search for your model and click on ‘software&drivers’. 2 Download the software onto a CD-R or USB storage device.
8 Product specifications Note • Specification and design are subject to change without notice. Region code Country DVD Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India China Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format • Audio: .mp3, .wma • Video: .divx, .divx ultra, .mpeg, .mpg, .wmv (simple profile) • Picture: .jpeg, .
Speaker : 100 x 280 x 115 (mm) Tall speaker: 260 x 1101 x 260 (mm) • Weight: • Center: 1.40 kg • Speaker: 1.05 kg/each • Tall speaker: 3.73~3.81 kg/each • Cable length: • Center: 3 m • Front: 4 m • Rear: 10 m Laser speci cation • Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 800 nm (CD) • Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. 9 Troubleshooting English • • Warning • Risk of electric shock. Never remove the casing of the product.
Sound No sound. • Ensure that the audio cables are connected and select the correct input source (for example, AUDIO SOURCE) for the device you want to play. No sound on HDMI connection. • You might not hear any sound if the connected device is not HDCP (Highbandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. • Ensure that the [HDMI Audio] is enabled. No sound from TV program.
MP3 create MP3 files play A ampli er audio connection language settings synchronize with video audio input mapping 16 8 15, 10 14 11 12 C care change settings connect audio from TV guide other devices TV wireless module connectors contact us 4 13 R 12 16 12 12 7 5 5 P 14 15 F le formats one-touch play one-touch standby overview connectors main unit remote control 10 16 4 E EasyLink settings O password picture options slide show thumbnail overview troubleshooting play disc MP3 player options
S safety settings audio general parental control preferences restore factory settings video software update version sound mode surround troubleshooting subtitle language system audio control 3 14 14 15 15 15 14 15 15 9 9 18 10 12 T time search video troubleshooting TV audio from TV connect 11 17 8, 12 7 U USB play software update 11 15 V video options settings synchronize with audio video on demand (VOD) 20 EN 10 14 11 14
