Register your product and get support at www.philips.
1 Important Safety Care for your product Care of the environment Help and support 2 Your home theater Main unit Connectors Remote control 6 Update software 2 2 3 3 3 4 4 4 5 3 Connect and set up 7 Connect speakers 7 Connect to TV 8 Connect audio from TV and other devices 9 Set up speakers 10 Set up EasyLink (HDMI-CEC control) 10 4 Use your home theater Discs Data files USB storage devices Audio, video, and picture options Radio MP3 player Create MP3 files Choose sound 5 Change settings Language setti
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.
2 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Connectors This section includes an overview of the connectors available on your home theater. Front connectors Main unit This section includes an overview of the main unit. a MUSIC iLINK Audio input from an MP3 player. b (USB) Audio, video or picture input from a USB storage device.
g AUDIO IN-AUX 1/AUX 2 Connect to an analog audio output on the TV or an analog device. h DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. i DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. Remote control English f ANTENNA FM 75 Signal input from an antenna, cable or satellite. This section includes an overview of the remote control.
a (Standby-On) Switch the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. • b (Open/Close) Open or close the disc compartment, or eject the disc. c Source buttons • DISC: Switch to disc source.Access or exit the disc menu when you play a disc. • AUDIO SOURCE: Select an audio input source. • RADIO: Switch to FM radio. • USB: Switch to USB storage device.
English 3 Connect and set up This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide. For a comprehensive interactive guide, visit www.connectivityguide. philips.com. Note • For identification and supply ratings, see the type plate • at the back or bottom of the product.
5 SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall. Make your rear speakers wireless Connect the rear speakers to your home theater wirelessly using a wireless module accessory. For details, see the wireless module user manual. What you need • A Philips wireless module. (Model: Philips RWSS5512, sold separately) 1 2 3 Connect the wireless transmitter to the Wireless Rear Audio connector on your home theater.
3 Connect an audio cable to hear the TV audio through your home theater (see 'Connect audio from TV and other devices' on page 9). On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. • If you cannot hear the TV audio through your home theater, set up the audio manually (see 'Set up the audio' on page 11). 3 4 When you watch TV programs, press SOURCE on your home theater repeatedly to select the correct audio input.
Set up speakers TV Option 2: Connect audio through a digital coaxial cable Good quality audio 1 Using a coaxial cable, connect the COAXIAL connector on your home theater to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Set up the speakers manually to experience customized surround sound.
Enable EasyLink 1 2 3 4 Press • [Audio Input Mapping] (Audio input mapping): If system audio control does not work, map the connected device to the correct audio input connector on your home theater (see 'Set up the audio' on page 11). Note • To change the EasyLink control settings, press SETUP, select [Video Setup] > [HDMI Setup] > [EasyLink Setup]. SETUP. Select [Video Setup] and then press OK. Select [HDMI Setup] > [EasyLink Setup] > [EasyLink] > [On].
4 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the TV to the correct source for your home theater (for example, HDMI, AV IN). Discs Your home theater can play DVDs, VCDs, and CDs. It can also play discs that you’ve made at home, such as CD-R discs of photos and music.
Your home theater can play pictures, audio and video files contained in a disc or a USB storage device. Before you play a file, check that the file format is supported by your home theater (see 'File formats' on page 21). 1 2 Play the files from a disc or USB storage device. To stop play, press . • To resume the video from where you stopped, press .
USB storage devices Enjoy pictures, audio, and video stored on a USB storage device such as an MP4 player or digital camera. What you need • A USB storage device that is formatted for FAT file system, and complies with the Mass Storage Class. For MP3: 1 2 1 • If you use a USB extension cable, USB HUB or USB multireader, the USB storage device may not be recognized. files without using a special computer program. 1 2 3 4 Connect a USB storage device to the (USB) connector on your home theater.
1 2 3 Press INFO to access picture preview mode. » 12 thumbnail pictures are displayed. Press the Navigation buttons and OK to select a picture. If the picture and audio files are from the same disc or USB storage device, you can create a musical slideshow. 3 4 5 Select an audio track and then press OK. Press folder. BACK and then go to the picture 3 Use the remote control to listen or to change radio stations. Button Action Numeric buttons, / Navigation buttons Select a preset radio station.
6 Create MP3 files Use your home theater to convert audio CDs into MP3 files. What you need • An audio disc. • A USB storage device. 1 2 3 4 Connect a USB storage device to your home theater. Press CREATE MP3. » A confirmation message is displayed. Select [Yes], and then press OK. » The create MP3 screen is displayed. The right panel contains MP3 settings and the left panel shows the audio tracks.
English Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Press SURR repeatedly to select a surround mode. • 5CH STEREO: Enhanced stereo sound. Ideal for party music. • MULTI-CH/DOLBY PLII: Traditional 5.1 channel for a more relaxing cinematic experience. • STEREO: Two-channel stereo sound. Ideal for listening to music. Note • If the audio source is a 2.1 channel. multi-channel mode will output 5-channel stereo sound.
5 Change settings The home theater settings are already configured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting. Picture and video settings 1 2 Note • You cannot change a setting that is grayed out. • To return to the previous menu, press BACK. To exit the menu, press SETUP. Language settings Onscreen display language 1 2 Press SETUP. Select [General Setup] and then press OK.
Energy saving settings Password and Ratings 1 2 1 2 Press SETUP. Select [Preference Setup] and then press OK. • [Password]: Set or change your password for parental control access. If you do not have a password or have forgotten your password, enter 0000. • [Parental]: Enable maturity-based restricted access for playback of DVDvideo that are recorded with ratings. To play discs irrespective of the rating, select [8 Adult]. Lock disc 1 2 Press SETUP. Select [General Setup] and then press OK.
6 Update software Philips continually tries to improve its products. To get the best features and support, update your home theater with the latest software. Compare the version of your current software with the latest version on www.philips.com/ support. If the current version is lower than the latest version available on the Philips support website, upgrade your home theater with the latest software. Caution • Do not install a lower version of software than the current version installed on your product.
File formats • • • Audio: .mp3, .wma Video: .avi, .divx, .mpg, .mpeg, Picture: .jpg, .jpeg Amplifier Note • Specifications and design are subject to change without notice. • • • Region codes The type plate on the back or bottom of the home theater shows which regions it supports.
USB Remote control batteries • • • • Compatibility: Hi-Speed USB (2.0) Class support: USB Mass Storage Class (MSC) File system: FAT16, FAT32 Main unit • • • • • Power supply: • Europe/China/Russia/India: 220-240V~, 50 Hz • Latin America/Asia Pacific: 110-127V/220-240V~, 50-60 Hz Power consumption: 105 W Standby power consumption: ≤ 0.5 W Dimensions (WxHxD): 435 x 56 x 344 mm Weight: 3.0kg Subwoofer • • • • Impedance: 4 ohm Speaker drivers: 165 mm (6.
Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the home theater do not work. • Disconnect the home theater from the power supply for a few minutes, then reconnect. Picture No picture.
Cannot play a DivX file. • Make sure that the DivX file is encoded according to the 'Home Theater Profile' with the DivX encoder. • Make sure that the DivX file is complete. DivX subtitles do not display correctly. • Make sure that the subtitle file name is the same as the movie file name (see 'Subtitles' on page 13). • Select the correct character set (see 'Subtitles' on page 13). Cannot read the contents of a USB storage device.
Compliance English 9 Notice This section contains the legal and trademark notices. Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Copyright in the UK This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC).
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. HDMI, and HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
A audio from TV and other devices audio input mapping audio language for discs audio options auto standby B batteries C change password character set check current version connect analog audio cable connect coaxial audio cable connect coaxial audio cable connect composite video cable connect FM antenna connect HDMI cable connect home theater connect optical audio cable connect speakers connect to TV connectors consumer support control play buttons create MP3 D disc menu discs display brightness displ
R radio recycling remote control overview repeat mode restore default settings rotate pictures S screen saver setup menu sleep timer slideshow sound mode speakers placement speakers setup specifications subtitle language for discs supported file format supported media formats surround sound synchronize picture and sound system audio control T time search titles trademarks troubleshooting U update software USB storage device V video options video resolution VOD code for DivX 28 EN 15 3 5 12 19 12
Language Code book1 indd
M ac © 2012 Koninklijke Philips Electronics N.V. All rights reserved.