Register your product and get support at www.philips.
1 Importante Aviso importante y de seguridad Aviso sobre marcas comerciales 6 Ajuste del sonido 4 4 5 Control del volumen Ajuste de graves y agudos Selección de Ambisound Selección de un sonido preestablecido 7 Ajustes de configuración 2 Producto Resumen de las características Descripción del producto 3 Conexión Colocación del producto Conexión de los cables de vídeo Conexión del subwoofer Conexión de la antena de radio Conexión de los cables de audio/otros dispositivos Conexión del cable de alimentaci
1 Importante Aviso importante y de seguridad Advertencia • Riesgo de sobrecalentamiento. Nunca instale • • • • • • el producto en un espacio reducido. Deje siempre un espacio de 10 cm, como mínimo, en torno al producto para que se ventile. Asegúrese de que las ranuras de ventilación del producto nunca están cubiertas por cortinas u otros objetos. Nunca coloque este producto, el control remoto o las pilas cerca de llamas sin protección u otras fuentes de calor, incluida la luz solar directa.
• Para cumplir la directiva de EMC (2004/108/ EC), el enchufe del cable de alimentación no deberá desmontarse de este producto. Cómo deshacerse del producto antiguo y de las pilas El producto se ha diseñado y fabricado con materiales y componentes de alta calidad, que se pueden reciclar y volver a utilizar. Cuando este símbolo de contenedor de ruedas tachado se muestra en un producto indica que éste cumple la directiva europea 2002/96/EC.
Fabricado con licencia de acuerdo con los números de patente de EE. UU. 5.451.942, 5.956.674, 5.974.380, 5.978.762 y 6.487.535, y otras patentes de Estados Unidos y de todo el mundo emitidas y pendientes. DTS y DTS Digital Surround son marcas comerciales registradas y el símbolo y los logotipos de DTS son marcas comerciales de DTS, Inc. © 19962008 DTS, Inc. Todos los derechos reservados.
Ha adquirido un producto Philips. Para beneficiarse totalmente de la asistencia que ofrece Philips, registre el producto en www. philips.com/welcome. Resumen de las características Philips EasyLink El producto es compatible con Philips EasyLink, que utiliza el protocolo HDMI CEC (Consumer Electronics Control). Los dispositivos compatibles con EasyLink que estén conectados a través de conectores HDMI se pueden controlar con un solo mando a distancia.
Descripción del producto Unidad principal h g feba i • Para conectar un dispositivo USB admitido. j MP3 LINK • Conecta un reproductor de audio portátil. k FOR iPod DOCK • Conecta la estación base para iPod (accesorio opcional, no incluido). i dc j k a (Modo de espera-encendido) • Enciende el sistema de cine en casa o activa el modo de espera. b SOURCE • Selecciona el medio que se reproduce o el audio que se escucha del dispositivo conectado. c VOL +/• Aumenta o disminuye el volumen.
a b c d n e o p q r f g c Botones de fuente • DISC: Cambia al origen de disco. • USB: Cambia al origen USB. • RADIO: Cambia a la radio FM. • AUDIO SOURCE: Selecciona un origen de entrada de idioma. • iPod DOCK: Cambia al iPod de la base. d e • • h i • s j t u v a b k l m (Modo de espera-encendido) • Enciende el sistema de cine en casa o activa el modo de espera. • Cuando EasyLink está activado, el sistema de cine en casa y todos los dispositivos EasyLink cambian al modo de espera.
j Botones numéricos • Selecciona la reproducción de un elemento. k AUDIO SYNC • Selecciona un idioma de audio o canal. • Manténgalo pulsado para acceder a la configuración de sincronización de audio; después, pulse +/- para ajustar el tiempo de retardo del audio. • En el modo de radio, alterna entre FM estéreo y FM mono. l SOUND MODE • Selecciona un efecto de sonido predefinido. m REPEAT / PROGRAM • Selecciona o desactiva el modo de repetición o reproducción aleatoria.
3 Conexión Colocación del producto • Realice las siguientes conexiones para comenzar a usar el sistema de cine en casa.
Conexión de los cables de vídeo 3 Una vez que haya terminado, cierre la cubierta posterior. Nota Conecte el sistema de cine en casa al televisor para ver la reproducción de un disco. Seleccione la mejor conexión de vídeo que admita el televisor. • Opción 1: conexión a la toma HDMI (para un televisor compatible con HDMI, DVI o HDCP). • Opción 2: conexión a la toma SCART (para un televisor estándar).
Opción 2: conexión a la toma SCART Opción 3: conexión a la toma de vídeo por componentes SCART COMPONENT VIDEO OUT 1 Es pa ñol SCART Utilice un cable euroconector para conectar la toma SCART del sistema de cine en casa a la toma de entrada de euroconector del televisor. Nota • La conexión mediante euroconector facilita la salida de audio del televisor a través de los altavoces. Pulse AUDIO SOURCE varias veces hasta que aparezca ‘SCART INPUT’ en el panel de visualización.
Conexión del subwoofer Conexión de la antena de radio FM ANTENNA (75 Ω) TO MAIN UNIT LOUDSPEAKERS TO SUBWOOFER 1 Conecte la antena FM a la toma FM75 del subwoofer (en algunos modelos, este cable ya viene conectado). 2 Extienda la antena FM y fije los extremos de la misma en la pared. Consejo 1 Desenrolle el cable de interconexión del subwoofer de TO MAIN UNIT. 2 Conecte el extremo blanco del cable de interconexión a la toma LOUDSPEAKERS del sistema de cine en casa.
Conexión de los cables de audio/otros dispositivos Conexión de audio de un receptor por cable, un grabador o una consola de juegos Transmita el sonido de otros dispositivos a este sistema de cine en casa a fin de disfrutar de reproducción de audio con funciones Surround multicanal. Puede elegir realizar la conexión a una toma analógica o digital, dependiendo de la capacidad del dispositivo.
Conexión a la toma coaxial Nota • Para escuchar la salida de audio de esta conexión, pulse AUDIO SOURCE varias veces hasta que aparezca ‘OPTICAL INPUT’ en el panel de visualización. DIGITAL OUT Conexión del reproductor de medios portátil COAXIAL DIGITAL IN 1 Utilice un cable coaxial (no incluido) para conectar la toma COAXIAL DIGITALIN del subwoofer a la toma de salida COAXIAL/DIGITAL del dispositivo.
• Este sistema de cine en casa puede reproducir o mostrar únicamente archivos MP3, WMA, DivX (Ultra) o JPEG que estén guardados en dichos dispositivos. • Pulse USB para acceder al contenido y reproducir los archivos. Conexión de la estación base para iPod Conexión del cable de alimentación Advertencia • Riesgo de daños en el producto. Compruebe que el voltaje de la fuente de alimentación se corresponde con el voltaje impreso en la parte posterior o inferior del producto.
3 Déle la vuelta al sistema de cine en casa de forma que la parte inferior esté boca arriba. 4 Quite el pie de goma presionándolo hacia la parte posterior del sistema de cine en casa. Repita este paso para quitar el otro pie de goma. 5 Coloque el soporte suministrado en la pared, perfore los agujeros para los tornillos e inserte los tacos de goma (no incluidos) en los agujeros.
4 Comienzo Instalación de las pilas del control remoto Control de una fuente de reproducción 1 Pulse uno de los botones RADIO, USB o DISC para seleccionar la fuente que desee controlar. 2 Seleccione la función deseada (por ejemplo, o ). Es pa ñol Desplazamiento por los menús 1 Deslice la tapa de las pilas para extraerla de la parte posterior del control remoto. 2 Introduzca las 2 pilas suministradas (AAA). Asegúrese de que los extremos + y - de las pilas coinciden con las marcas del interior.
Búsqueda del canal de visualización correcto Configuración inicial de Ambisound 1 2 Cuando encienda el sistema de cine en casa por primera vez, siga las instrucciones del televisor para completar la configuración de Ambisound a fin de obtener el mejor efecto de sonido Surround posible. 3 Pulse para encender el dispositivo. Pulse DISC para cambiar al modo de disco.
5 Pulse para continuar. » Aparece la pantalla [Acústica habitación]. 8 Acústica habitación Seleccione el tipo de paredes que tiene su habitación: Seleccione la altura a la que está colocado el sistema de cine en casa y, a continuación, pulse . » Aparece la pantalla [Posición de escucha]. Posición de escucha Seleccione la distancia entresu posición de escucha y el sistema SoundBar: Duro (hormigón, madera) Blando (cortinas, exteriores) Cerca (< 2m / 6.5ft) Predetermin.(2-3m / 6.5-9.
Activación de la exploración progresiva Si el televisor admite la función de salida de exploración progresiva, puede utilizar una conexión de vídeo por componentes para conectar el sistema de cine en casa al televisor. (Consulte ‘Conexión de los cables de vídeo’ > ‘Conexión a la toma de vídeo por componentes’). 6 Seleccione [Vídeo por componentes] >[YUV] y, a continuación, pulse OK. 7 Seleccione [Progresivo] >[Activar] y, a continuación, pulse OK. » Aparece un mensaje de advertencia.
El producto es compatible con Philips EasyLink, que utiliza el protocolo HDMI CEC (Consumer Electronics Control). Los dispositivos compatibles con EasyLink que estén conectados a través de conectores HDMI se pueden controlar con un solo mando a distancia. Nota • Philips no garantiza la compatibilidad al 100% con todos los dispositivos HDMI CEC. 1 Active las funciones HDMI CEC en el televisor y en otros dispositivos conectados.
4 5 Seleccione [Config. de EasyLink] y, a continuación, pulse . • Las funciones [Reprod. con un toque] y [Espera con un toque] vienen activadas de fábrica de forma predeterminada. Selección de una fuente de reproducción En la unidad principal Seleccione [Control audio sist.] > [Activar] y, a continuación, pulse OK para iniciar la búsqueda de dispositivos. » Una vez que haya terminado, aparecerá el menú de asignación de las entradas de audio. • Asig. entr.
5 Reproducción Reproducción de vídeo Nota Reproducción de un disco • En los discos de vídeo, la reproducción siempre se reanuda desde el punto en el que se detuvo la última vez. Para comenzar la reproducción desde el principio, pulse mientras se muestra el mensaje. Precaución • No coloque nunca ningún objeto que no sea un disco en la bandeja de discos. • No toque nunca la lente óptica de disco que se encuentra dentro de la bandeja de discos. 1 2 3 Pulse para abrir la bandeja de discos.
Cambio de la reproducción de vídeo 1 2 Acceso al menú de DVD Reproduzca un título. Utilice el mando a distancia para cambiar la reproducción de vídeo. Botón Acción AUDIO Selecciona un idioma de audio SYNC o canal. SUBTITLE Permite seleccionar el idioma de los subtítulos para la reproducción de vídeo. REPEAT Selecciona o desactiva el modo de repetición o reproducción aleatoria. • Las opciones de repetición varían según el tipo de disco.
Si la reproducción de vídeo es más lenta que la salida de audio (el sonido no se corresponde con las imágenes), puede retrasar la salida de audio para que coincida con el vídeo. 1 Mantenga pulsado AUDIO SYNC hasta que se muestre ‘AUDIO SYNC’. 2 Antes de que transcurran cinco segundos, pulse +/- para ajustar el tiempo de retardo de la salida de audio. Nota Cómo comenzar a reproducir desde un tiempo especificado 1 Durante la reproducción, pulse INFO. » Aparece el menú de estado del disco.
Reproducción de vídeo DivX® Reproducción de música El vídeo DivX es un formato de medios digital que conserva una alta calidad a pesar de su elevado índice de compresión. Puede disfrutar de vídeo DivX, ya que este producto es DivX® Certified. Control de la reproducción de pistas de audio 1 Inserte un disco o dispositivo USB que contenga vídeos DivX. 2 Pulse DISC o USB. » Aparece un menú de contenido. 3 Seleccione un título para reproducirlo y, a continuación, pulse .
MP3 y WMA son tipos de archivo de audio de elevada compresión (archivos con extensiones .mp3 o .wma). Reproducción de fotografías Reproducción de fotografías como secuencia de diapositivas 1 Inserte un disco o dispositivo USB que contenga música MP3/WMA. 2 Pulse DISC o USB. » Aparece un menú de contenido. 1 3 Inserte un disco o dispositivo USB que contenga fotos JPEG. Seleccione una carpeta y, a continuación, pulse OK. 2 4 Seleccione una pista para reproducirla y, a continuación, pulse .
Nota • Es posible que se tarde más tiempo en mostrar el contenido del disco en el televisor debido al gran número de canciones o fotografías recopiladas en un disco. • Si las fotos JPEG no están grabadas con el tipo de archivo ‘exif ’, no se mostrará en pantalla la imagen en miniatura real. Se sustituirá por la imagen en miniatura de una ‘montaña azul’.
Reproducción desde un dispositivo USB Reproducción desde reproductor de medios portátil Este producto puede reproducir o mostrar archivos MP3, WMA, DivX (Ultra) o JPEG que estén guardados en los siguientes dispositivos USB: • cámara digital que cumpla el estándar PTP • unidad flash • lector de tarjetas de memoria • disco duro (necesita una fuente de alimentación externa) Es pa ñol Simplemente conecte el reproductor de medios portátil (por ejemplo, el reproductor de MP3) a este sistema de cine en casa pa
Reproducción desde el iPod Control de música del iPod Necesitará una estación base para iPod (accesorio opcional, no suministrado) para disfrutar de sus contenidos a través del sistema de cine en casa.
Acción VOL +/-, +/SOUND Aumenta o disminuye el volumen. Selecciona un efecto de sonido predefinido. AMBISOUND Selecciona la salida de sonido estéreo o la salida Surround multicanal. Salta a la pista anterior o siguiente. / Realiza búsquedas rápidas hacia delante (derecha) o hacia atrás (izquierda). Púlselos varias veces para cambiar la velocidad de búsqueda. Inicia, pone en pausa o reanuda la reproducción.
Sintonización inicial Cuando acceda al modo de radio por primera vez, siga las instrucciones para instalar las emisoras de radio. 1 2 Pulse RADIO. » Aparecerá el mensaje ‘AUTO INSTALL ... PRESS PLAY’. Pulse . » Se memorizan todas las emisoras de radio detectadas. Nota • Si la emisora de radio FM transmite datos RDS (del inglés Radio Data System, sistema de datos por radio), aparece el nombre de la emisora.
6 Ajuste del sonido Selección de un sonido preestablecido Control del volumen Pulse VOL +/- para aumentar o disminuir el volumen. • Para silenciar el volumen, pulse . • Para restablecer el volumen, pulse de nuevo o pulse VOL +. 1 Pulse SOUND MODE varias veces para seleccionar el efecto de sonido que se adapte mejor al vídeo o la música que se esté reproduciendo. Vídeo/Música Ajuste de graves y agudos 1 2 Pulse TREBLE o BASS.
7 Ajustes de configuración Configuración general Configurac. general Config. de EasyLink Bloqueo disc Puede personalizar los distintos tipos de ajustes como prefiera. Consulte las siguientes instrucciones para desplazarse por los menús de configuración. Atenuar pant. Idioma menús Prot. pant. Temporizador Símbolo Opciones Espera bajo consumo [Config. gral.] Cód VAS DivX(R) [Config. audio] 1 Pulse SETUP. » Aparece el menú [Config. gral.]. 2 3 Pulse . [Conf.
Descripción [EasyLink] Desactiva o activa todas las funciones EasyLink. Para desactivar esta función, seleccione [Desactivar]. [Reprod. Al pulsar PLAY, se encienden con un el televisor y el sistema de toque] cine en casa. Si hay algún disco en el sistema de cine en casa, empezará a reproducirse. Para desactivar esta función, seleccione [Desactivar].
[Temporizador] Cambia automáticamente al modo de espera después del tiempo preestablecido. • [15 mins], [30 mins], [45 mins] o [60 mins]: selecciona el tiempo que transcurre antes de que el sistema de cine en casa pase al modo de espera. • [Desactivar]: desactiva el modo de temporizador de desconexión automática. [Espera bajo consumo] Activa o desactiva el modo de espera de bajo consumo. Reduce el consumo de energía del modo de espera. • [Activar]: establece el modo de espera de bajo consumo de energía.
Descripción [Guía config.] [Acústica habitación] [Lugar habitación] [Altura] Le guiará por todos los requisitos de configuración. Selecciona el tipo de paredes de la habitación. Selecciona la colocación en la habitación. Selecciona la altura a la que está situado. Selecciona la distancia entre la posición de escucha y el sistema de cine en casa. [Posición de escucha] [Audio HDMI] Selecciona el ajuste de audio HDMI cuando conecta el sistema de cine en casa y el televisor mediante un cable HDMI.
[Pantalla TV] Selecciona uno de los siguientes formatos de visualización: 4:3 panorámico (PS) • • • 4:3 buzón (LB) 16:9 Wide Screen [4:3 panorámico]: Para televisores con pantalla 4:3: una pantalla de altura completamente ajustada y extremos laterales recortados. [4:3 buzón]: Para televisores con pantalla 4:3: una pantalla ancha con barras negras en las partes superior e inferior. [16:9 Wide Screen]: Para televisores panorámicos: relación de aspecto de 16:9.
Preferencias Nota • Detenga la reproducción del disco para poder acceder a [Preferencias]. Preferencias [Progresivo] Si el televisor admite la función de salida de exploración progresiva, puede activar el modo de exploración progresiva para mejorar la calidad de la imagen. Es necesaria la conexión de vídeo mediante vídeo por componentes. • [Activar]: activa el modo de exploración progresiva. • [Desactivar]: desactiva el modo de exploración progresiva.
[Menú de disco] Selecciona el idioma del menú del disco. Nota • Si el idioma que ha establecido no está disponible en el disco, éste utiliza su propio idioma predeterminado. • En algunos discos, el idioma de los subtítulos o del audio se puede cambiar únicamente en el menú del disco. • Para seleccionar los idiomas que no están enumerados en el menú, seleccione [Otros].
[Subtítlo DivX] Selecciona un juego de caracteres que admita subtítulos DivX. Alemán, danés, español, estonio, finlandés, francés, inglés, irlandés, italiano, luxemburgués, noruego (bokmål y nynorsk), portugués, sueco y turco [Centroeur.
8 Información adicional 7 Actualización de software Para comprobar si hay actualizaciones, compare la versión de software actual del sistema de cine en casa con la versión de software más reciente (si está disponible) del sitio Web de Philips. Pulse DISC o USB y, a continuación, siga las instrucciones que aparecen en el televisor para confirmar la ejecución de la actualización. » Cuando haya finalizado la actualización de software, este sistema de cine en casa cambiará automáticamente al modo de espera.
Nota • Las especificaciones y el diseño están sujetos a cambios sin previo aviso.
Potencia (subwoofer) • Fuente de alimentación: 220-240 V; ~50 Hz • Consumo de energía: 150 W • Consumo de energía en modo de espera: • Normal: < 3 W • Bajo consumo: < 0,3 W • Sistema: sistema Bass Reflex • Impedancia: 4 ohmios • Controladores de altavoz: woofer de 165 mm (6,5 pulgadas) • Respuesta de frecuencia: 30 Hz ~ 120 Hz • Dimensiones (an. x al. x prof.
10 Solución de problemas Advertencia No aparece ninguna imagen con la conexión HDMI. • Compruebe si el cable HDMI está dañado. Sustituya el cable HDMI por uno nuevo. • Si esto ocurre cuando cambia la resolución de vídeo HDMI, pulse HDMI varias veces hasta que aparezca la imagen. • Riesgo de descarga eléctrica. No quite nunca Para que la garantía mantenga su validez, no trate nunca de reparar el producto usted mismo.
Reproducción No se pueden reproducir archivos DivX. • Compruebe que el archivo DivX está codificado en modo ‘perfil de cine en casa’ con el codificador DivX. • Asegúrese de que el archivo de vídeo de DivX esté completo. La relación de aspecto de la pantalla no está coordinada con el ajuste de visualización del televisor. • La relación de aspecto está fija en el disco. Los subtítulos de DivX no se ven correctamente.
D DivX® El código DivX® es una tecnología de compresión de vídeo basada en MPEG4 pendiente de patente, desarrollada por DivX®, Inc., que puede reducir el tamaño de los archivos de vídeo digital y aun así conservar una elevada calidad de imagen. Dolby Digital Sistema de sonido Surround desarrollado por Dolby Laboratories que contiene hasta seis canales de audio digital (izquierdo y derecho frontales, izquierdo y derecho Surround, central y subwoofer).
P PBC Control de reproducción Sistema para desplazarse por un CD de vídeo o Super VCD mediante menús en pantalla grabados en el disco. Puede disfrutar de la búsqueda y reproducción interactivas. PCM Modulación de código de pulso. Sistema de codificación de audio digital. R Relación de aspecto La relación de aspecto hace referencia a la relación de longitud por altura de las pantallas de televisor.