User manual

5
EN
English
3 Getting started
Prepare for humidication
1 Hold by both sides of the upper unit
to lift it up (g. b).
2 Remove the packaging material of
the new humidication lter (g c).
Note
• In order to get the optimal
humidication result, soak the lter in
water for 30 minutes before use.
3 Assemble the new humidication
lter around the lter support
(g d).
4 Put the lter and the lter support
back into the water tank (g e).
5 Fill the water tank with cold tap
water until water reaches the
maximum water level indication
(g. f).
6 Place the upper unit back onto the
water tank (g. g).
2 Your humidifier
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that
Philips oers, register your product at
www.philips.com/welcome.
The Philips humidier brings fresh,
humidied air to your house for the
health of your family.
It oers you advanced evaporation
system with NanoCloud technology,
using a special humidication lter
which adds H2O molecules to the dry
air, and produces healthy humid air
without formation of water mist. Its
humidication lter retains bacteria,
calcium and other particles from the
water. It delivers only pure humidied
air in your home. No more dry air
in the winter season or from the air
conditioning.
Read this user manual carefully before
you install and use the humidier. Save
it for future reference.
What's in the box
Check and identify the contents of your
package (g. a):
A Upper unit
B Humidication lter (FY2401)
C Filter support
D Float
E Water tank
F User manual
G Warranty