User Manual
Table Of Contents
- Introduction
- Important safety information
- Intended Use
- Your Philips Sonicare Power Flosser
- Nozzles
- Modes and intensities
- Getting Started
- Using your Cordless Power Flosser
- Charging
- Cleaning
- Storage
- Replacement
- Frequently asked questions
- Warranty and support
- Recycling
- 说明
- 重要安全信息
- 预期用途
- 飞利浦 Sonicare 便携式电动水牙线 (Cordless Power Flosser)
- 喷嘴
- 模式和强度
- 开始使用
- 使用 便携式电动水牙线 (Cordless Power Flosser)
- 充电
- 清洁
- 存放
- 更换
- 常见问题
- 保修和支持
- 回收
- 簡介
- 重要安全資訊
- 適合用途
- 您的 Philips Sonicare Power Flosser (圖 1)
- 噴嘴
- 模式和強度
- 使用入門
- 使用 Sonicare 攜帶式高效四象水流牙線機 (Cordless Power Flosser)
- 充電
- 清潔
- 收納
- 更換
- 常見問題集
- 保固與支援
- 回收
11
English
Intensities
×3
×1
×2
Your Cordless Power Flosser comes with three
different intensity settings. To change the intensity to
the setting you prefer, press the intensity button.
Note: It is recommended to start using this Power
Flosser on the lowest intensity and increase the
intensity over the course of a few weeks.
Getting Started
Charging your Cordless Power Flosser
1
Gently pull and rotate the charging port cover on
the back of the Cordless Power Flosser to expose
the charging port .
2
Plug the USB-C charging cable into the USB-C
charging port on the back of the Cordless Power
Flosser.
Note: Make sure the handle is completely dry
before you connect the USB-C cable.
1
2
3
Connect the USB cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.
4
The battery indicator flashes while charging (see
'Charging').
Note: It can take up to 8 hours to fully charge the
battery, but you can use the Cordless Power Flosser
before it is fully charged.
Note: Replace the charging port cover on the Cordless
Power Flosser when not actively charging.