User manual

4 Gently move the vibrating brush head in a slightly circular
motion so the longer bristles reach between your teeth.After
2 seconds, glide the bristles to the next section and pause
while you gently circulate the bristles again. Continue this
routine throughout your 2-minute brushing cycle to effectively
remove plaque in those hard-to-reach places.
5 To maximize Sonicare's effectiveness use light pressure and let
the Sonicare toothbrush do the brushing for you. Do not
scrub.
C
6 To make sure you brush evenly throughout the mouth, divide
your mouth into 4 sections: outside top, inside top, outside
bottom and inside bottom teeth. Begin brushing in section 1
(outside top teeth) and brush for 30 seconds before moving to
section 2 (inside top teeth). Continue brushing for 30 seconds
in each section progressing through all 4 sections until you've
brushed for 2 minutes.
7 After the 2-minute brushing cycle is complete, additional time
should be spent brushing the chewing surfaces of your teeth.
Press the power button to turn the brush on and off as needed..
To clean your mouth more completely, you may also brush your
tongue, with the toothbrush turned on or off, as you prefer.
Remember to floss daily.
Features
Easy-start\ brushing power ramp-up
◗ All Sonicare models come with the Easy-start feature activated
(on), which helps you get used to brushing with Sonicare.
◗ Brushing power will gently increase to full power over the first 12
brushings.
◗ The Easy-start feature is active if you hear 2 beeps immediately
after turning on your Sonicare. Once you reach optimal brushing
power (after the 12th brushing), you will no longer hear the
double beep at the beginning of your brushing routine.
◗ Note: each of the first 12 brushings must be at least 1 minute in
length to properly move through the Easy-start ramp-up cycle.
To turn off or reactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in a plugged-in charger base.
3 Press and hold the power button for 5 seconds.You will hear 1
beep if the Easy-start feature is off. If you hear 2 beeps, Easy-
start is active (on).
ENGLISH8
1
2
4
3