User manual

2 Insert a small standard screwdriver into the
bottom of the handle and turn it counter-
clockwise to remove the screw. Pull the end
cap off of the handle.
3 Insert the screwdriver between the handle and
the internal frame. Tilt the screwdriver
to loosen the handle.
4 Remove the internal frame from the handle.
5 Remove the rubber bumpers that are on top
and below the battery.
6 Insert the screwdriver between the battery
and the frame. Tilt the screwdriver to pop
the battery out of the frame.
1
2
2
1
ENGLISH 13