User manual

Intensity levels
- Low: 1 LED indicator light (Fig. 7)
- Medium: 2 LED indicator lights (Fig. 8)
- High: 3 LED indicator lights (Fig. 9)
Note: To adjust the intensity level, press the power on/off button to let your Sonicare
cycle through the intensity levels in the following order: High, Medium, Low, High etc.
Each touch of the button allows you to select the next available intensity level.
Battery status (when handle is not on charger)
- A yellow battery level indicator indicates a low charge.
- A green battery level indicator indicates a high charge.
- The battery level indicator turns off when the battery is in between
a low and a high charge.
Note: When you hear 3 beeps and the yellow LED of the battery level
indicator ashes, this means the battery charge is below 10% and the
toothbrush should be recharged.
Note: When you hear 2 sets of 5 beeps, this means the Sonicare will not
operate and needs to be recharged.
Note: To keep the battery fully charged at all times, you may keep the
Sonicare on the charger when not in use.
Features
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth. The Quadpacer
feature works at all 3 intensity levels (Fig. 10).
Smartimer
The Smartimer indicates that your brushing cycle is complete when it
automatically switches off the toothbrush at the end of the brushing cycle.
Dentists recommend brushing at least 2 minutes twice a day.
Note: After brushing for 1.5 seconds, pressing the power on/off button causes
the toothbrush to pause. After a pause of 30 seconds, the Smartimer resets.
ENGLISH10