User manual
2 After the 2 minutes of Clean mode, the White
mode begins with a change in brushing sound
and motion. That is your signal to start brushing
the visible upper front teeth for 15 seconds
3 At the next beep and pause, move to the
visible lower front teeth for the nal
15 seconds of brushing.
Brushing modes
The Sonicare automatically starts in the default
Clean mode. To select a different brushing mode:
1 Press the on/off button to toggle between
modes.
, The green LED indicates the selected mode.
Note: You can only switch between modes when the
toothbrush is switched on.
Clean mode
Standard mode for superior teeth cleaning.
Sensitive mode (specic types only)
Gentle yet thorough cleaning for sensitive gums and
teeth.
Clean and White mode
2 minutes of Clean mode with an additional 30 seconds
of White mode to focus on the visible front teeth.
Note: When the Sonicare is used in clinical studies,
the default 2-minute Clean mode must be selected.
However, in whitening/stain reduction studies, the Clean
and White mode must be selected. The handle should
be fully charged and the Easy-start feature deactivated.
ENGLISH10