User manual
Note: You can switch the toothbrush on or off at any
time by pressing and holding the power on/off button
for 2 seconds.
Clean and White mode brushing
instructions
The Clean and White mode combines 2 minutes
of Clean mode for a whole mouth clean, with an
additional 30 seconds of White mode to focus on
the visible front teeth.
1 Brush the rst 2 minutes as instructed in steps
1-6 above.
2 After the 2 minutes of Clean mode, the White
mode begins with a change in brushing sound
and motion. This is your signal to start brushing
the upper front teeth for 15 seconds.
3 At the next beep and pause, move to the
bottom front teeth for the nal 15 seconds of
brushing.
Brushing modes
Sonicare automatically starts in the default Clean
mode. To select a different brushing mode:
1 Press the on/off button to toggle between
modes.
, The green LED indicates the selected mode.
Note: You can only toggle between modes when the
toothbrush is switched on.
Clean mode
Standard mode for superior teeth cleaning.
Sensitive mode (specic types only)
Gentle yet thorough cleaning for sensitive gums
and teeth.
ENGLISH12
4235_020_7376_1_DFU luxury booklet_A6_v3.indd 12 08/04/14 09:13