User manual

Unplug the sanitizer, discontinue use and
call Consumer Care if:
- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitizer.
- The sanitizer gives off smoke or a burning smell
while it is operating.
Note: UV light can be harmful to the human eye and
skin. This device should be kept out of reach of children
at all times.
1 After brushing, rinse the brush head and shake
off excess water.
Do not place the travel cap on the brush head
during sanitization.
2 Place your nger in the door recess on top of
the sanitizer and pull open the door.
3 Place the brush head on one of the 2 pegs in the
sanitizer with the bristles facing the light bulb.
Note: Only clean Sonicare snap-on brush heads in the
sanitizer.
Note: The Sonicare for Kids brush head wears and
degrades in the UV sanitizer. You have to check and
replace your child’s brush more frequently than regular
Sonicare brush heads (See chapter ‘Replacement’).
4 Make sure the sanitizer is plugged into a live
outlet of appropriate voltage.
5 Close the door and press the green power on/
off button once to select the UV clean cycle.
Note: You can only turn on the sanitizer if the door is
properly closed.
Note: The sanitizer stops if you open the door during
the sanitizing cycle.
ENGLISH14