User manual

Features
Easy-start
This Philips Sonicare comes with the Easy-
start feature deactivated.
The Easy-start feature gently increases the
power over the rst 14 brushings to help you
get used to the brushing with the Philips
Sonicare.
Note: Each of the rst 14 brushings must be at
least 1 minute in length to properly advance
through the Easy-start ramp-up cycle.
Activating or deactivating the Easy-start
feature
1 Attach the brush head to the handle if
charger base is used.
2 Place the handle in the charging base or
charging travel case.
- To activate Easy-start:
Press and hold the power on/o button
for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has
been activated.
- To deactivate Easy-start:
Press and hold the power on/o button
for 2 seconds. You hear 1 beep to indicate
that the Easy-start feature has been
deactivated.
Note: Using the Easy-start feature
beyond the initial ramp-up period is not
recommended and reduces Philips Sonicare
eectiveness in removing plaque.
16
English
4235_021_2431_2_DFU-Luxury_A6_v4.indd 16 15/02/17 12:15