User manual

6 Press and hold the activation button until spray
comes out of the tip of the nozzle.
Using the appliance
1 Make sure the AirFloss is switched on.
2 Place the tip between the teeth and apply
gentle pressure. Slightly close your lips over the
nozzle when it is in place, to avoid splashing.
Tip: Use your nger to press the activation button.
Note: The AirFloss is intended to be used on the front/
outside surface of the teeth only.
3
Press the activation button to deliver a single burst
of air and micro-droplets of mouthwash or water
between the teeth. Alternatively, hold the activation
button to deliver continuous bursts of mouthwash
or water approximately every 1 second.
4 Slide the guidance tip along the gum line until
you feel it settle between the next two teeth.
5 Continue this procedure for all spaces
including behind your back teeth.
6 To switch off the AirFloss, press the on/off
button again.
ENGLISH10