User manual
Using the appliance
1 Make sure the AirFloss is switched on.
2 Place the tip between the teeth and apply
gentle pressure. Slightly close your lips
over the nozzle when it is in place, to avoid
splashing.
Tip: Use your finger to press the activation button.
Note: The AirFloss is intended to be used on the front/
outside surface of the teeth only.
3 Press the activation button to deliver a single
burst of air and micro-droplets of mouthwash
or water between the teeth. Alternatively,
hold the activation button to deliver
continuous bursts of mouthwash or water
approximately every 1second.
4 Slide the guidance tip along the gum line until
you feel it settle between the next two teeth.
5 Continue this procedure for all spaces
including behind your back teeth.
6 To switch off the AirFloss, press the on/off
button again.
Automatic shut-off function
The automatic shut-off function automatically
switches off the AirFloss if it has not been used for
4 minutes.
ENGLISH 9