User manual

6 To switch off the AirFloss, press the on/off button again.

Automatic shut-off function

The automatic shut-off function automatically switches off the

AirFloss if it has not been used for 4 minutes.

Cleaning

If the AirFloss becomes clogged, or to clean the inside of the AirFloss,

fill the reservoir with warm water and press the activation button until

the reservoir is empty.

Do not clean the nozzle, handle or charger in the dishwasher.

Do not use cleaning agents to clean the appliance. The formulation

or strength of some agents may damage the appliance.

Handle and nozzle

1 Remove the AirFloss nozzle from the handle. Rinse the nozzle

after each use to eliminate the residue left in it. (Fig. 14)

2 Open the reservoir and rinse it under a faucet to eliminate residue.

(Fig. 15)

Tip: You can also use a cotton swab to wipe the reservoir and

remove the remaining residue.

Note: Do not immerse the handle in water.

Note: Failure to remove residue from the nozzle or reservoir may

result in an unhygienic condition.

3 Wipe the entire surface of the handle with a damp cloth. (Fig. 16)

Charger

1 Unplug the charger before you clean it.

2 Wipe the surface of the charger with a damp cloth.

Storage

If you are not going to use the AirFloss for an extended period of

time, follow the steps below.

1 Open the cover of the reservoir and empty it.

English