User manual

Note: Ensure that braces or dental restorations are properly adhered and not
compromised. If not, braces or dental restorations may be damaged when
they come into contact with the brush head.
Note: When the Philips Sonicare is used in clinical studies, the default 2-minute
Clean mode with high intensity must be selected. The handle should be fully
charged and the Easy-start feature deactivated.
Brushing modes
Clean mode
The ultimate in plaque removal (default mode).
White mode
To brighten and polish your front teeth.
1 Press the power on/off and mode button to switch on the Philips
Sonicare.
2 Press the power on/off and mode button again before 2.5 seconds
to switch to White mode.
3 Press the power on/off and mode button after 2.5 seconds to pause
the Philips Sonicare.
Intensity levels
- Low: 1 LED indicator light
- Medium: 2 LED indicator lights
- High: 3 LED indicator lights
Note: To adjust the intensity level to the next higher or lower level, press
the + intensity level button to increase intensity or the - intensity level button
to decrease intensity at any time during the brushing cycle.
Battery status (when handle is not on charger)
- A ashing yellow battery level indicator indicates a low charge.
- A ashing green battery level indicator indicates a moderate charge.
- A solid green battery level indicator indicates a full charge.
ENGLISH10