User manual

Easy-start

The Easy-start feature gently increases the power over the first 14

brushings to help you get used to the brushing with the Philips

Sonicare. The Easy-start feature works in all modes other than

TongueCare mode. This Philips Sonicare model comes with the Easy-

start feature activated.

Activating or deactivating the Easy-start feature

1 Place the handle in the plugged-in charger.

To activate Easy-start:

Press and hold the power on/off for 2 seconds. You hear 2 beeps to

indicate that the Easy-start feature has been activated.

To deactivate Easy-start:

Press and hold the power on/off for 2 seconds. You hear 1 beep to

indicate that the Easy-start feature has been deactivated.

Note: Using the Easy-start feature beyond the initial ramp-up period

is not recommended and reduces Philips Sonicare effectiveness in

removing plaque.

Note: Each of the first 14 brushings must be at least 1 minute in length

to properly move through the Easy-start ramp-up cycle.

Traveling with the appliance

Charging with travel case (specific types only)

1 Place the handle in the charging travel case.

2 Connect the charging travel case to a UL 60950-1 and IEC 60950-1

Listed computer, laptop, USB hub, USB receptacle, or wall adapter.

3 The wall adapter you use with this product, shall have an output

marked Class 2 or the limited power source (LPS) requirements

and compatible with the electrical ratings marked on the travel

case.

4 The battery indication flashes white until your toothbrush is fully

charged.

Important: The wall adapter must be a safe extra low voltage source,

compatible with the electrical ratings marked on the device.

English