User manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Intended use
- Your Philips Sonicare (Fig 1.)
- Sonicare app - Getting started
- Getting started
- Using your Philips Sonicare toothbrush
- Features
- Activating or deactivating features
- Charging and battery status
- Cleaning
- Storage
- Replacement
- Troubleshooting
- Locating the model number
- Warranty and support
- Disposal
- Removing the rechargeable battery
- Introducción
- PRECAUCIONES IMPORTANTES
- ADVERTENCIAS
- ADVERTENCIAS MÉDICAS
- Instrucciones de seguridad para las baterías
- Campos electromagnéticos (CEM)
- Cumplimiento con las reglas de la Comisión Federal de Comunicaciones (FCC por sus siglas en inglés)
- Cumplimiento con las reglas de la Comisión Federal de Comunicaciones (ISED por sus siglas en inglés)
- CONSERVE ESTAS INSTRUCCIONES
- Uso previsto
- Su Philips Sonicare (Fig. 1).
- Aplicación Sonicare: introducción
- Antes de empezar
- Uso de su cepillo dental Philips Sonicare
- Funciones
- Activar o desactivar funciones
- Carga y estado de la batería
- Limpieza
- Almacenamiento
- Sustitución
- Solución de problemas
- Localice el número de modelo
- Garantía y asistencia
- Desecho
- Remover la batería recargable
- Introduction
- MISES EN GARDE IMPORTANTES
- Utilisation prévue
- Brosse à dents Philips Sonicare (fig. 1)
- Première utilisation de l’application Sonicare
- Préparation
- Utilisation de votre brosse à dents Philips Sonicare
- Caractéristiques
- Activation et désactivation de fonctions
- Charge et état de la pile
- Nettoyage
- Rangement
- Remplacement
- Dépannage
- Emplacement du numéro de modèle
- Garantie et assistance
- Mise au rebut
- Retrait de la pile rechargeable
33
English
2 Remove and discard the brush head. Cover the
entire handle with a towel or cloth.
1
2
3 Hold the top of the handle with one hand and
strike the handle housing 0.5 inch above the
bottom end. Strike firmly with a hammer on all
4 sides to eject the end cap.
Note: You may have to hit on the end several
times to break the internal snap connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release easily
from the housing, repeat step 3 until the end
cap is released.
5 Holding the handle upside down, press the
shaft down on a hard surface. If the internal
components do not easily release from the
housing, repeat step 3 until the internal
components are released.
6 Wedge the screwdriver between the battery
and the black frame at the bottom of the
internal components. Then pry the screwdriver
away from the battery to break the bottom of
the black frame.