Dear customer, Congratulations on your choice of Philips DSR 1000 satellite receiver. This Philips satellite receiver will allow you to obtain digital satellite programmes and services. We wish you much viewing pleasure with your new Philips DSR 1000. Note: This product is intended for Germany, Austria and Italy. GB CONTENTS 1. SAFETY INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2. CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTION Important remarks on operation The following section contains important remarks concerning the operation, location and connection of the receiver. Please read these instructions carefully before using the unit for the first time. Extended absence/use during adverse weather conditions Always switch off the unit during periods of extended absence and during thunder storms by means of the power switch located on the front right-hand side.
Important remarks on location and assembly Location All electronic equipment generates heat, which is however not dangerous. Delicate furniture surfaces and finishes may become slightly discoloured over time due to the permanent heat source. Likewise, the feet of the equipment may cause discolouring on treated surfaces. If need be, place the unit on a suitable mat. GB Ventilation Heat occurring in this unit is discharged adequately.
CONNECTIONS The following connections are located on the back of the unit: 1 2 1 - 230 V/50 Hz: 3 4 5 6 7 Connect the power cable to the power socket. 2 - AUDIO TV L & R: Audio output, left and right-hand channel for connecting to a stereo unit. 3 - TV: Connect the TV connection socket to your television unit using the SCART cable supplied. 4 - VCR: VCR SCART socket for connecting a video recorder. 5 - DATA INTERFACE: RS 232 interface for serial data transfer during servicing.
YOUR REMOTE RC : Detailed M : Activates MAINMENU: • channel Arrangement. • Channel Search. • Satellite Selection. • Installation. E : Switch to previous channel Menu: Exit from current menu. 2 : Switch the receiver in and out of standby mode. TV : Switch receiver from Radio to TV mode or switch between Sat. Receiver-TV or TV-set. B : Change volume up. Menu: Increase a selected parameter by one unit. Remote Control functions on-screenDisplay (OSD) on/off.
OPERATING YOUR UNIT 3.1 LOCAL OPERATION Open (and close) the flap on the front of the unit by pressing the marked area (on the right-hand side). Local operation is by means of the keys STANDBY, V and W for switching between channels upwards/downwards (CH -/+), as well as C and B for adjusting the volume (VOL -/+). To switch between radio and TV, press the STANDBY key briefly and then within one second the C key for radio or B for TV mode.
3.2 REMOTE CONTROL FUNCTIONS Switching on from standby mode is done using the red key or using the number keys 0 ... 9. The unit software contains a functional description for the remote control. To consult this, simply press the RC key on the remote control and then the keys for which you require assistance the appropriate help instructions appear on the screen. Exit the help menu by pressing the RC key again.
A favourite list is a list in which channels selected from a channel pool can be organised. By default the names of the favourite lists are pre-defined similar to the following example. However, the name of the favourite list can be changed according to individual preferences. Each favourite list has the available channel numbers P000....P999.
3.6 SELECTING THE CHANNEL LANGUAGE Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the W and V keys. The language originally set remains selected when you quit the menu using the E key. GB The selected language is stored when you quit the menu using the OK key. N.B.: Please note that many channels only offer one language.
Deleting timer programming: 1...8 OK N.B.: N.B.: Select the timer row to be deleted using the number keys 1...8 or the W or V key and delete the programmed data using the OK key. If you accidentally delete a row and wish to reconstitute the original information, exit the timer menu by pressing the E key twice. The time and date are programmed from the DVB data transmitted by the channel. Please correct the ‘Time offset’ in the Installation menu when switching from summer to winter time and vice versa.
MENU STRUCTURE 4.1 CHANNELS 4.1.1 Favourite list GB Call up the main menu using the M key and then press the OK key twice. Sorting, swapping, copying and deleting channels - in one single menu! i M TV WV CB Select one of the favourite lists 0...9. Select the relevant satellite (e.g. Astra, Eutelsat or other). Select the channel source (e.g. NEW or ALL channels). Select the target position in the favourite list (tip of grey or green arrow).
Switching to the left menu window is done using the W and V keys; switching to the right menu window is done using the C and B keys. The highlighting of the windows heading and channel will show which window is active. For each action (copying, swapping or deleting) you thus see the appropriate TV channel in the current window. The search function also locates channels that do not contain a usable TV channel.
4.1.3 Channel pool (for advanced users) The channel pool contains all channels in alphabetical order. Selection depending on satellite is done using the M key; free or encrypted channels are chosen by pressing the TV key. All free (or all encrypted) channels on the selected satellite are contained in the «All Free» section, also the new free or encrypted channels after performing satellite search mode. WV Select channels in rows. GB CB Select channels in columns.
4.1.4 Parental control The five-digit security code (PIN) is set to 0 0 0 0 0 in the factory by default. a) Changing the security code (PIN) Select the «Parental control» menu using key 4 from the Main menu «Channels». Then select the {PIN} input field using key 2 or the W key and activate it by pressing the OK key. Enter the ‘old’ and your ‘new’ PIN in the following sequence. 1. Please enter the current PIN. (= 0 0 0 0 0 for first use) 2. Please enter the new PIN. 3. Please repeat the new PIN. N.B.
4.2 SEARCH MODE 4.2.1 Satellite search mode Satellite search mode is performed for all frequencies on the selected satellite. Select the desired settings in the menu sequence. Selecting the individual parameters is performed after activating using the OK key and then using the B or C key. GB We recommend launching the search mode occasionally in order to detect new channels. For this purpose use the basic settings shown in {bold}.
4.3 SATELLITES The ASTRA 19.2° and Eutelsat 13° (Hotbird) satellites are activated as per the default factory settings. Six other satellites are pre-programmed, but not activated. If you expand your reception equipment, you can make the required settings and activations for the pre-programmed satellites in the ‘Satellite’ menu. Activate the desired satellite number, e.g. using the number keys 1...8, and call up the Input menu using the OK key.
4.4.2 Menu language (1) Select language. The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {Turkish}. (2) Select character set. Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that characters from an incorrect character set may appear in a text.
4.4.4 LNB settings (1) (2) LNB {ON} {OFF} standard setting operation without LNB signal (e.g. only with special cabling systems) In standby mode {OFF} standard setting N.B.: For certain units only use the {OFF} setting, as otherwise the receiver continues to supply power to the LNB also in standby mode. The power consumption of the receiver can thus increase from 2 watts to up to 10 watts in standby mode. {ON} The LNB power remains on in standby mode, e.g.
4.4.6 Download Over Air (software update via satellite) You can update the operating software and the channel lists (each individually) for your receiver via the ASTRA satellite (update via Download Over Air) using the Download sub-menu. The data for various units are transferred consecutively on a special receiving channel (thus the term data carousel). To receive this data your receiving unit must be aligned with the ASTRA satellite at 19.2° east. N.B.
GLOSSARY 20 Band Frequency band of a satellite. Low band and high band. CA Conditional Access: denotes encrypted channels. CVBS Composite Video Burst Sync: video standard for TV or VCR equipment. DiSEqC Digital Satellite Equipment Control DVB Digital Video Broadcast EPG Electronic Programme Guide Favourite list List of selected channels from the channel pool. Free Freely receivable (not encrypted) channels. GHz Abbreviation for gigahertz (giga = billion).
TECHNICAL DATA Channels • • • • • • • • • • • 2000 storage positions for TV channels and for 2000 radio channels. 10 individually definable favourite lists each containing 1000 channel positions (e.g. for channel types SPORT, NEWS, MUSIC etc.). 8 satellites (individually activatable). GB 24 characters for channel and/or station names. Channel selection using 1, 2 or 3-digit input. Channel selection using UP/DOWN keys. Channel changing for 2 channels using one key (Last Channel).
RF range • • • Sat-IF frequency range 950 - 2150 MHz Input level ranges 43 - 83 dBµV Reception threshold (EB/NO) < 4.5 dB TV system digital • • • • • • Modulation, FEC, demultiplexer DVB-S standard Video resolution CCIR 601 (720 x 576) • • • Input data rate 2 - 45 Msymbol/s Bit rate 1.5 - 15 MBit/s Video voltage/impedance 1 V/75 Ohm S/N > 53 dB Audio decoding MPEG-1/2, layers 1+2 Bit rate 32/44.1/48 kHz Audio frequency range 0.
TROUBLESHOOTING When you have problems with your Philips DSR 1000, first check following points. PROBLEM POSSIBLE CAUSE ACTION No picture, no sound and no front panel display. Receiver is not plugged into the mains or is not switched on. Check mains connection. Press the ON/OFF button on the front of the receiver. No picture, no sound ; but the front panel shows the time or “--”. The receiver is on standby. Press on the B button on the remote control to bring the receiver out of standby.
DFU DSR 1000 - 3111 176 51003 03 / 03
