Headphones Fidelio L3 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headset 3 3 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 4 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old product and battery Remove the integrate
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth headphones Plane Adaptor Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips over-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy noise cancelation.
Overview of your Bluetooth wireless headset 1 3 4 5 6 7 8 2 1 2 3 4 5 6 7 8 (Power button) USB Type C charger slot ANC/Awareness mode button Voice Assistant Touch Control Panel LED indicator Audio jack Microphone
3 Get started Charge the battery Note Before you use your headset for the first time, charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headset, as connecting the headset for charging will power the headset off. Connect the supplied USB charging cable to: • • The USB type C charging slot on the headphones and; The charger/USB port of a computer.
4 Use your headphones Connect the headset to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED will turn on 2s. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. Google Fast Pairing The headphone supports Google Fast Pairing • Enter pairing mode of the headphone. • The Bluetooth of Android smartphone should also turn on.
Manage your calls and music On/off Task Turn the headphones on Turn the headphones off Button Power button Power button Operation Press and hold for 2 seconds. Press and hold for 2 seconds. The blue LED is on and fades out. Smartphone voice assist function (e.g. Google app, Siri) Task Wake up smartphone voice assist function Button Voice Assistant button Operation Press and hold 2 seconds Note Please refer to the operating instructions of the smartphone.
Wearing Detection • The music playback will be paused when take off the headphone from wearing. • Then, the music playback will be resumed when you put on the headphone. Note If you do not wear the headphone for more than 5 minutes, the headphone will be powered off. APP download Scan the QR code/press 'Download' button or search 'Philips Headphones' in Apple App Store or Google Play to download App.
6 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google is a trademark of Google LLC. The Google Assistant is not available in certain languages and countries.
8 Frequently asked questions My Bluetooth headset does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. How to reset pairing. Press/hold both Power button + ANC for 3s with USB power removed. I hear but cannot control music on my Bluetooth device (e.g. play/pause/skip forward/backward).
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_Fidelio L3_10_EN_V1.