For product information and support, visit www.philips.
E N G L I SH User manual 1 Important 4 2 2.1 2.2 Your SpeechMike What’s in the box Overview 6 6 7 3 3.1 Get started Installation 8 8 4 4.1 4.2 Use your SpeechMike Create a recording Use the bar-code scanner (LFH3610 only) 9 9 Use more of your SpeechMike Customize the SpeechMike Customize SpeechMike keys and settings Use application shortcuts Update the firmware Configure the bar-code scanner (LFH3610 only) 10 10 6 Technical data 14 7 Frequently asked questions 15 5 5.1 5.1.1 5.1.2 5.
1 Important The manufacturer reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Safety • To avoid a short circuit, do not expose the product to rain or water.
E N G L I SH areas and patient care equipment, such as surface disinfectant wipes, can be used to clean the device. • Do not use harsh chemicals or strong detergents. • Do not rub or strike the surface with anything hard as this may scratch or damage the surface permanently. Disposal of your old product • Your product is designed and manufactured with high quality materials and components that can be recycled and re-used.
2 Your SpeechMike Congratulations on your purchase and welcome to Philips! Visit our website for comprehensive support such as user manuals, software downloads, warranty information and much more: www.philips.com/dictation. 2.1 What’s in the box Dictation microphone Hanging bracket USB cable CD-ROM containing software and user manual For product information and support, visit www.philips.
Overview 1 Microphone 1 2 Record indicator light 2 3 • EOL end-of-letter key, •• PRIO priority key 3 E N G L I SH 2.
3 Get started 3.1 Installation Recording and playback of dictations with the SpeechMike requires dictation software such as Philips SpeechExec to be installed on the computer. When third-party dictation software other than Philips SpeechExec is used, driver software must be installed before connecting the SpeechMike. C Important Administrator rights are required to install the software. For more help, contact your administrator. 1 Turn on the computer.
Use your SpeechMike This chapter describes how to use the SpeechMike with Philips SpeechExec dictation software. If the SpeechMike is used with thirdparty software other than Philips SpeechExec, some features may not be present or function differently. For detailed information, refer to the documentation delivered with the software. 4.1 4.2 Use the bar-code scanner (LFH3610 only) 1 Press the scan button and scan the barcode.
5 Use more of your SpeechMike 5.1 Customize the SpeechMike Use the Device Control Center software to customize the SpeechMike to suit individual user needs. The software allows to assign different functions to each key, enable or disable certain features and also to start and control applications with the SpeechMike. 5.1.1 Customize SpeechMike keys and settings 1 The dictation microphone must be connected to the computer with the USB cable.
The Device Control Center software includes pre-installed profiles that make the SpeechMike ready for immediate operation with Dragon NaturallySpeaking speech recognition software and Microsoft Powerpoint. Additional profiles for other applications can be programmed. 1 If the option to start the Device Control Center automatically was selected during installation, the application icon appears in the notification area of the Windows task bar.
• Dragon NaturallySpeaking command • Delay 3 On the tab Application control, click the button to create a new profile. 4 Browse and select the application executable and click on OPEN. A profile for the selected application will be added to the list of profiles. D Note Exit the target application during configuration. Open the application when the device configuration settings are saved. 5 Select a button from the button colum and click the icon to assign a shortcut.
5.2 Update the firmware Your SpeechMike is controlled by an internal program called firmware. Newer versions of the firmware may have been released after you have purchased the SpeechMike. 1 Download the firmware update for your SpeechMike model from www.philips.com/ dictation. 2 The dictation microphone must be connected to the computer with the USB cable.
6 Technical data Connectivity • USB: Mini-USB 2.
Frequently asked questions The operating system stops responding after restart Using the Philips SpeechMike together with certain USB hubs may cause the operating system to stop responding when the computer is started. Unplug the SpeechMike before starting the PC and reconnect it afterwards. We recommend replacing the USB hub or connecting your SpeechMike directly to the USB port of the computer.
14 User manual
Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Philips may void the user’s authority to operate the equipment.
Discover the comprehensive range of professional dictation products from Philips www.philips.com/dictation Specifications are subject to change without notice. © 2012 Speech Processing Solutions GmbH. All rights reserved. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used by Speech Processing Solutions GmbH under license from Koninklijke Philips Electronics N.V. All trademarks are the property of their respective owners. Document version 1.
