Operation Manual

24 User manual
E Tip
Voice recognition performance can be adversely
aected by background noise during training,
or words that sound similar, such as “four”
and “door”. The Digital Pocket Memo may
prompt you to repeat the training procedure to
guarantee reliable voice recognition.
Enter keywords using voice command5.5.2
Press and hold the 1
VOICE smart button
1
while stopped to activate the keyword
recognition mode.
Say the keyword or the word for the next 2
character. If the word is recognized, the cor-
responding keyword or character is displayed.
Release the 3
VOICE smart button.
Press the 4
OK smart button
2
to accept
the keyword and assign it to the current
recording, or repeat from step 1 to modify
the keyword.
RECOGNIZE
Work Type:
VOICE CANCEL
DPM0002.DSS
VOICE NEW
2:36
#2
1
2
A B C
D Note
A keyword can have a maximum of 15
characters. For more than 7 characters, the
character size will be reduced to fit the display.
Menu settings5.6
To access the Digital Pocket Memo menu:
Press the 1
MENU button
1
while in the stop
position to open the menu.
Press the 2 + or – button
2
to select the
next/previous menu item.
Press the 3
ENTER smart button
3
or the
MENU button
1
to enter a sub-menu.
Press the
BACK smart button
4
to exit the
menu.
Press the 4 + or – button
2
to select a
function.
Press the 5
OK smart button
4
to confirm
a selection or the
CANCEL smart button
3
to exit a sub-menu without changing a
setting.
Delete dictation
Insert mode
Keywords
Setup
Language
BACK ENTER
4
3
1
2
Menu list5.6.1
D Note
Some settings, such as defining keywords or •
switching to the simple display mode, are
available only through Philips SpeechExec Pro
Dictate. See Advanced configuration on page 19
for more information.
Press and hold the •
MENU button for a few