DVD VIDEO DIGITAL SURROUND SYSTEM 3600D LX 1 001-041-LX36-22-Eng 1 21/08/2003, 9:43 AM
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio LX3600D, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. Fatto a Eindhoven Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. This product complies with the radio interference requirements of the European Community. This DVD/SACD player is in conformity with the EMC directive and low-voltage directive.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English --------------------------------------- 6 Deutsch Français ------------------------------------ 42 Nederlands Deutsch ------------------------------------ 78 Nederlands ------------------------------ 114 5 001-041-LX36-22-Eng 5 21/08/2003, 9:43 AM
Contents English General Information Disc Operations Supplied accessories ................................... 8 Care and safety information ..................... 8 Playable discs .............................................. 20 Playing discs ................................................ 20 Turning on/off auto Eco Power standby mode ....................................................... 21 Using the Disc Menu ................................ 21 Basic playback controls ............................
DVD Menu Options Sound and Volume Controls Basic Operations ....................................... 27 General Setup Menu ................................. 27 Program (not for Picture CD/MP3) ..... ............................................................ 27-28 Disc Lock ............................................... 28 Screen Saver .......................................... 28 Audio Setup Menu .................................... 29 Speaker Menu .......................................
General Information English Supplied accessories Care and safety information Avoid high temperatures, moisture, water and dust – Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) Always keep the disc tray closed to avoid getting dust on the lens.
Connections Step 2: Connecting speakers and subwoofer Front Right English Step 1: Set up the speakers Front Left Centre AUDIO L ~AC MAINS FRONT CENTER FRONT RIGHT LEFT REAR RIGHT REAR LEFT SUBW L R R SPEAKERS (4 ) AUX IN LINE OUT Rear Right You can choose to mount the speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws.
Connections English Step 3: Placing the speakers and subwoofer Front Speaker (Left) 1 Centre speaker and DVD System Front Speaker (Right) 2 1 4 3 Rear speaker (Left) 3 Subwoofer For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position. 1 Place the front left and right speakers at Rear speaker (Right) Helpful Hints: – To avoid magnetic interference, do not position the front speakers too close to your TV.
Connections English Step 4: Connecting TV S-VIDEO IN AUDIO OUT SCART IN VIDEO IN AUDIO OUT S-VIDEO IN SCART IN VIDEO IN OR FM/MW ANTENN AUDIO ~AC MAINS L L R R FM MW FRONT CENTER FRONT RIGHT LEFT REAR RIGHT REAR LEFT SUBW SPEAKERS (4 ) AUX IN LINE OUT IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV.
Connections English Step 5: Connecting FM/MW antennas ➠ MW antenna Step 6: Connecting the power cord FM antenna ~AC MAINS FRONT CENTE RIGHT 1 fix the claw into the slot 2 FM/MW ANTENNA COMPONENT VIDEO IN FM 75 AUDIO OUT S-VIDEO IN Pr/Cr ~ AC MAINS MW Pb/Cb VIDEO IN Y S-VIDEO SCART 1 Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall. 2 Connect the supplied FM antenna to the FM jack.
Connections (Optional) English Connecting a VCR S-VIDEO IN AUDIO OUT AUDIO OUT SCART IN VIDEO IN S-VIDEO IN SCART IN VIDEO IN 1 ~ AC MAINS ANT IN VCR TO TV S-VIDEO FM/MW ANTENNA AUDIO L ~AC MAINS FRONT CENTER FRONT RIGHT LEFT REAR RIGHT REAR LEFT SUBW L R R FM 75 3 MW SPEAKERS (4 ) Viewing and listening to the playback 1 Connect the VCR to the TV as shown.
Functional Overview English 1 2 3 4 56 7 8 VOLUME DVD HOME ENTERTAINMENT SYSTEM IR OPEN/CLOSE PLAY/PAUSE STOP SOURCE PREV NEXT STANDBY-ON Main unit and remote control 1 STANDBY ON (B) – Switches to Eco Power standby mode or turns on the system. – Led ON in Eco Power standby mode. 2 Disc tray 3 System display panel 4 iR SENSOR – Point the remote control towards this sensor. 5 SOURCE – Selects the relevant active source mode: DISC, TV, TUNER or AUX. – DISC: to switch to DISC source mode.
Functional Overview English ª $ REPEAT – Selects various repeat modes. % REPEAT A-B – Repeats a specific section on a disc. 5 • 9 8 0 ≥ ! ! 7 § ∞ ≤ £ ™ @ # $ % ^ & * ( ¡ ) ^ AUDIO – Selects an audio language (DVD) or an audio channel (CD). & MUTE – Mutes or restores the volume. * PROG (PROGRAM) – DISC: starts programming. – TUNER: starts *automatic/ manual preset programming. ( SOUND – Selects a sound effect. ) SLEEP – Sets the sleep timer function. ¡ SURROUND (SURR.
Getting Started English Step 1: Inserting batteries into the remote control Step 2: Setting the TV IMPORTANT! Make sure you have completed all the necessary connections. (See page 11 “Connecting TV”). 3 1 Press SOURCE control until “DISC” 1 appears on the display panel (or press DISC on the remote). 2 2 Turn on the TV and set to the correct 1 Open the battery compartment. video-in channel. You should see the blue Philips DVD background screen on the TV.
Selecting the colour system that corresponds to your TV This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD system should match. Step 3: Setting the speakers’ channels You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.
Getting Started English Step 4: Setting language preference You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. Except the DVD system’s OSD language, it will remain once selected.
Getting Started Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Avestan Aymara Azerhaijani Bashkir Basque Belarusian Bengali Bihari Bislama Bokmål, Norwegian Bosnian Breton Bulgarian Burmese Castilian, Spanish Catalan Chamorro Chechen Chewa; Chichewa; Nyanja Chinese Chuang; Zhuang Church Slavic; Slavonic Chuvash Cornish Corsican Croatian Czech Danish Dutch Dzongkha English Esperanto Estonian Faroese Fijian Finnish French Frisian Gaelic; Scottish Gaelic Gallegan Georgian German Gikuyu; Ki
Disc Operations English IMPORTANT! – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Auto Eco Power standby mode This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any button within 30 minutes after a disc has stopped playing. Basic playback controls Unless stated, all operations described are based on Remote Control control use. Some operations can be carried out using the DVD System Menu. Pausing playback Using the Disc Menu 1 During playback, press Å.
Disc Operations English Repeat play mode ● While playing a disc, press REPEAT to select : REPEAT CHAPTER (DVD) – to repeat playback of the current chapter. REPEAT TRACK/TITLE (CD/VCD/DVD) – to repeat playback of the current track (CD/VCD)/title (DVD). REPEAT ALL (CD/VCD/SVCD) – to repeat playback of all the disc and all the programmed tracks. Repeat A-B (DVD/VCD/CD) 1 Press REPEAT A-B at your chosen starting point. 2 Press REPEAT A-B again at your chosen end point.
Disc Operations The Time Search function allows you to start playing at any chosen time on the disc. 1 Press OSD. 2 Press 3 4 to highlight time search box. ➜ The on-screen display shows the total playing time of the title/chapter. English Special DVD Features Time Search Playing a Title 1 Press RETURN/TITLE. ➜ The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad (0-9) to select a play option. 3 Press OK key to confirm.
Disc Operations English Special VCD & SVCD Features Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only) ● In stop mode, press DISC MENU to toggle between ‘PBC ON’ and ‘PBC OFF’. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. ➜ Use the S / T or use the numeric keypad (0-9) to highlight your selection and press OK to confirm to select a play option.
Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 16 “Setting the TV”). General Operation 1 Load an MP3/Picture (Kodak Picture CD, JPEG) disc. ➜ The MP3/Picture CD menu appears on the TV screen. 2 Use 3 4 to select the folder and press OK to open the folder. 3 Press 3 4 to highlight an option. 4 Press OK to confirm. ➜ The playback will start from the selected file to the end of the folder.
Disc Operations English Special MP3/JPEG features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 16 “Setting the TV”). Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press Ç during playback. ➜ Thumbnails of 12 pictures appears on the TV screen. Playback with multi-angles (JPEG) ● During playback, press 3 4 1 2 to rotate the picture on the TV screen.
Basic Operations Program (not for Picture CD/MP3) 1 Press SETUP in the STOP mode to enter the Setup Menu. 2 Press OK to enter the next level submenu or confirm your selection. 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired menu. 5 Press SETUP to quit the setup menu. ➜ The settings will be stored in the player’s memory even if the player is switched off.
DVD Menu Options English Program - cont’d Playback tracks 1 After complete programming, press 1 Screen Saver This function is used to turn the screen saver on or off. 234 to move the cursor to the START button. - - GENERAL SETUP PAGE - - 2 Press OK. ➜ Playback will start with the selected tracks under the programmed sequence. DISC LOCK PROGRAM OSD LANGUAGE SCREEN SAVER ON OFF Quit the program playback 1 In the ‘Program’ menu, use 1 234 to move the cursor to the EXIT button.
Audio Setup Menu Analog Output The options included in General Setup menu are: Speaker Setup and Analog Output. Set Analog Ouput to match your DVD system’s playback capability and can be accessed via the SURR button on the remote control. English DVD Menu Options - - AUDIO SETUP PAGE - SPEAKER SETUP ANALOG OUTPUT - - AUDIO SETUP PAGE - SPEAKER SETUP ANALOG OUTPUT 1 Press SETUP. 2 Press 1 2 to select the Audio Setup icon. 3 Press OK to confirm.
DVD Menu Options English Video Setup Menu TV Display - cont’d The options included in Video Setup menu are: TV Type, TV Display, Closed Caption and Picture Setting. - - VIDEO SETUP PAGE - TV TYPE TV DISPLAY CLOSED CAPTION PICTURE SETTING 4:3 Letter Box 4:3 Pan Scan 1 Press SETUP. 2 Press 1 2 to select the Video Setup icon. 3 Press OK to confirm. TV Display Set the aspect ratio of the DVD Player according to the TV you have connected.
Closed Caption Picture Setting Closed captions are data that are hidden in the video signal on specific discs, invisible without a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. For example, captions show sound effects (e.g., “phone ringing” and “footsteps”), while subtitles don’t.
DVD Menu Options English Password Setup Menu Preference Setup Menu This feature is used for Parental Control. Enter your six digit password when a hint is displayed on the screen. The default password is 842 100. The options included in Preference Setup menu are: Audio, Subtitle, Disc Menu, Parental, Default, MP3/JPEG Nav and PBC. - - PREFERENCE PAGE - AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT MP3/JPEG NAV PBC - - PASSWORD SETUP PAGE - PASSWORD CHANGE 1 Press SETUP.
MP3/JPEG Navigator Parental 1 Press 34 to highlight ‘Parental’. 2 Enter its submenu by pressing 2. 3 Use 34 to highlight a rating level for the disc inserted. ➜ DVDs that are rated above the level you selected will not play unless you enter your six-digit password and choose a higher level rating. ➜ To disable Parental controls and have all Discs play, choose ‘8 ADULT’. This feature allows you to select alternate settings when you playback picture CD and MP3 CD.
Tuner Operations English IMPORTANT! – Make sure the FM and MW antennas are connected. Presetting radio stations Tuning to radio stations Helpful Hints: – The system will exit presetting mode if no button is pressed within 20 seconds. – If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" appears. 1 Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”. 2 Press 3 / 4 briefly on the remote. ➜ "SEARCH" appears.
Tuner Operations DVD system’s display panel 1 FM 2 98:00 Manual presetting You can choose to store only your favourite radio stations. English Automatic presetting You can start the automatic presetting from a selected preset number. 1 In tuner mode, press S / T or 3 / 4 on the remote to select a radio station. 2 Press PROG. 3 Press 1 2 or use the numeric keypad (0-9) to select a preset number. 4 Press PROG again to store.
Sound and Volume Controls English Sound Control IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 9). Selecting surround sound ● Press SURR to select : MULTI-channel or STEREO. ➜ The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. ➜ The centre and surround speakers operate only when the DVD home cinema system is set to Multi-channel mode.
Setting the Sleep timer The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time. ● Press SLEEP on the remote repeatedly until it reaches the desired preset turn-off time. ➜ The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15… ➜ SLEEP will show on the display panel, except if "OFF" is selected. ➜ Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed. "SLEEP10" ™ "SLEEP9"....
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power. – – No picture. – – Distorted or poor picture.
Problem Solution The DVD player does not start playback. – – – – – – Insert a readable disc with the playback side facing down. Check the disc type, colour system and region code. Check for any scratches or smudges on the disc. Press SETUP to turn off the setup menu screen. Change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.
Specifications English AMPLIFIER SECTION MAIN UNIT Output power - Stereo mode (DIN) - Surround mode (1 kHz) Frequency Response Signal-to-Noise Ratio Input Sensitivity - AUX In - TV In Power Supply Rating Power Consumption Dimensions (w x h x d) Weight 50 W + 50 W RMS1 50 W RMS/channel 100 Hz – 20 kHz / –3 dB > 65 dB (CCIR) SPEAKERS 900 mV 450 mV TUNER SECTION Tuning Range 26 dB Quieting Sensitivity Image Rejection Radio IF Rejection Ratio Signal-to-Noise Ratio AM Suppression Ratio Harmonic Distortion
Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.).
