DVD Recorder Home Entertainment System 9000R LX
Norge Typeskilt finnes på apparatens bakside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet. Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio LX 9000R Philips risponde alle prescrizioni dell’art. 2 comma 1 del D. M. 28 Agosto 1995 n. 548.
Technical data ––––––––––––––––––––––––––––––– 5 General information Introduction ––––––––––––––––––––––––––––––––––– 6 Supplied Accessories –––––––––––––––––––––––––––– 6 Setup –––––––––––––––––––––––––––––––––––––––– 6 Maintenance ––––––––––––––––––––––––––––––––––– 6 Disc handling –––––––––––––––––––––––––––––––––– 6 Environmental information –––––––––––––––––––––––– 6 Which discs can be used? –––––––––––––––––––––––– 7 Region code ––––––––––––––––––––––––––––––––––– 7 Trademark and license information –
Contents English Playback Loading discs _________________________________ 30 Playing a DVD-Video disc _______________________ 30 Region code information _____________________ 30 Disc menu ________________________________ 30 Playing a (Super) Video CD ______________________ 31 PBC (Playback Control) ______________________ 31 What to do if PBC is deactivated? ______________ 31 Playing a DVD+R or DVD+RW disc _______________ 31 Playing a write protected DVD+R or DVD+RW disc __ 31 Playing a DVD+R or DVD+RW disc
Subject to modification without notice.
General information English Introduction Maintenance Record your own DVDs and enjoy the digital surround sound and some of the best features of home cinema technology with your DVD recorder system. Clean the set with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. This set complies with the radio interference requirements of the European Community.
Which discs can be used? There is a great number of disc types and you can use many of them on your DVD recorder system. Some can be used for playback only, others for playback and recording, but there are a few types of discs which cannot be used with this DVD recorder system.To determine which discs you can use on this DVD recorder system, refer to the logos shown below and look for these logos on your discs.
Remote Control English Inserting the batteries 2 1 REC/OTR 2 DVD/MON TV CAM 1/2 CD 3 SAT TUNER CDR/TAPE VCR/GAME 4 1 Open the battery compartment of the remote control and insert 2 alkaline batteries, type AA (R06, UM-3). 2 Close the battery compartment. 1 2 3 4 5 6 8 9 7 Do not use old and new or different types of batteries in combination. 5 Remove batteries if they are empty or if the remote control will not be used for a long time.
Remote Control 1 2 switches the DVD recorder system and a Philips appliance on or to standby 2 REC/OTR starts recording the TV channel or video source selected on the DVD recorder system 3 DVD/MON selects the disc in the tray or the TV channel selected on the DVD recorder system # 4 / – TV VOL skips to the beginning of the current or previous chapter/title/track of the inserted disc, searches backwards, tunes to a radio station with a lower frequency and decreases the volume of a Philips TV $ ¢ / TV VOL
Controls and connections English 1 2 $ 3456 1 2 STANDBY·ON switches the set on or to standby 2 SOURCE selects a source 3 4 SEARCH skips to the beginning of the current or previous chapter/title/track of the inserted disc, searches backwards skips to the beginning of the next chapter/title/track of the inserted disc, searches forwards 5 STOP 9 stops playback or recording 6 PLAY/PAUSE 2; starts/pauses playback 7 display/DVD recorder drawer 8 OPEN/CLOSE / opens/closes the DVD recorder drawer 9 SURR.
1 2 3 4 FRONT LEFT 4Ω RADIO FRONT RIGHT 4Ω CENT.
Speaker setup/Connecting … English Speaker setup Connecting the speakers Connect the supplied speakers using the supplied speaker cables.
Connecting the tuner antennas ● MW antenna Assemble the supplied MW loop antenna as shown below and connect it to RADIO MW. RADIO MW If you connect an appliance or change its connection after the initial installation, you need to “install” it on the DVD recorder system, i. e. you have to tell the DVD recorder system to which socket the appliance is connected. Otherwise the appliance will not be available on the DVD recorder system.
Connecting … English Connecting additional video appliances You can connect several video appliances with a SCART socket to EXT2 AUX I/O by connecting them in a “chain”: In the illustration below, a satellite receiver is connected to a VCR and the VCR to the DVD recorder system. Connecting additional audio appliances Please consult the user´s manual of your audio appliances on which connections are possible.
Connecting a camcorder to CAM 1 or CAM 2 You can connect 2 camcorders to the connections CAM 1 and CAM 2.The picture quality depends on the type of connection between the camcorder and the DVD recorder system: – good quality: Composite Video (Video CVBS) – better quality: S-Video – best quality: i.Link (IEEE 1394, Fire Wire) Connecting headphones ● Connect the headphones with an 3.5 mm plug to PHONES on the DVD recorder system. ➜ The speakers are switched off automatically.
Initial installation English During the initial installation, you will perform some basic settings of the DVD recorder system.You can change all settings of the initial installation later on.To change these settings please see the chapters of “System settings” and t Picture and u Language in “User preferences”. 6 Note: Some DVDs may override your audio and subtitle language selection. In this case, you have to select the audio and subtitle language in the DVDs Disc Menu. 7 2 3 4 5 6 Then press OK.
Initial installation You will be asked – about the distances between the speakers and your preferred listening position and – to which input sockets on the DVD recorder system you connected other appliances.
System settings English When adding appliances or changing the connections of appliances If you have connected additional appliances or changed the connections after the initial installation, you need to tell the DVD recorder system to which socket on the rear of the DVD recorder system the appliance is connected. After changing the connections of the VCR j, satellite receiver i or game console r Press AUDIO MENU to enter the audio menu. 1 2 Press 4 repeatedly to select INPUTS, then press 2.
When changing the speaker setup After changing the connections of the CD recorder p, CD player q or tape deck k Press AUDIO MENU to enter the audio menu. 1 2 Press 4 repeatedly to select INPUTS, then press 2. 3 Turn SOURCE on the DVD recorder system or use the source keys on the remote control to select either the CD recorder, CD player or tape deck. ➜ AVAILABLE and YES or NO are displayed. 4 If the appliance is not connected to the DVD recorder system: Press 4 repeatedly to select NO, then press OK.
System settings English Searching TV channels REC/OTR 2 DVD/MON TV CAM 1/2 CD 3 4 5 6 8 9 MENU 0 É SYSTEM ➜ CDR/TAPE VCR/GAME 2 DISC 1 Press 2 to start the automatic search. SAT TUNER 1 7 Autom. Search Select Autom. Search if new TV channels are available with your antenna or cable TV system. All previously stored TV channels will be overwritten. 2 After the search is complete, press SYSTEM MENU to exit.
Changing the order of TV channels and deleting TV channels English System settings Follow TV 1 Press OK to start Follow TV. ➜ TV 01 is displayed on the DVD recorder system. 2 Select the same programme number on the TV, then press OK. ➜ WAIT is displayed on the DVD recorder system. The DVD recorder system searches for this TV channel in its memory and stores it under the same programme number. Then, TV XX is displayed on the DVD recorder system, where XX is the number of next TV programme.
System settings English Additional TV channel settings TV channel name 1 Press 2 repeatedly to select a character of the TV channel name. 2 Press 3 or 4 repeatedly to set/change the desired REC/OTR 2 DVD/MON TV CAM 1/2 CD SAT TUNER CDR/TAPE VCR/GAME character. 3 Repeat steps 1 and 2 for all characters of the channel name. Note: Channel names are limited to 5 characters. 1 2 3 4 5 6 8 9 7 MENU SELECT AUDIO 0 DISC OK É SYSTEM 4 Press OK to store the TV channel name.
System settings Some TV channels are encoded and can be watched without distortions only with a decoder. If you have connected a decoder, please set which TV channel should be decoded with the decoder. REC/OTR 2 DVD/MON TV CAM 1/2 CD SAT TUNER CDR/TAPE VCR/GAME 1 2 3 4 5 6 7 8 9 MENU 1 Switch your TV set on. If necessary set the TV to the 2 Press DVD/MON. 3 Press CH+ or CH– or 0–9 repeatedly to select the É É É TV channel which you want to decode with the decoder.
Source selection 0 English Selecting a source REC/OTR 2 DVD/MON TV CAM 1/2 CD TUNER Notes: Please select the TV channels of a satellite receiver directly on the satellite receiver. You can select only sources which are installed on the DVD recorder system. If you connected an appliance or if you changed its connection after the initial installation, you need to install the appliance on the DVD recorder system. See “When adding appliances or changing the connections of appliances”.
8 7 Loudness enhances bass and treble at low volume. SELECT AUDIO 0 DISC Loudness 9 MENU ● OK É SYSTEM É É É H VOL Setting the volume balance between the speakers CH If a speaker appears too loud or too quiet in comparison to the rest of the speakers, you can adjust the volume balance between the speakers. MUTE - TV VOL + ∞ § REC MODE PLAY MODE 9 2; DISC DISPLAY T/C TIMER EDIT CLEAR RETURN SURR.
Surround sound English 8 7 OK É SYSTEM ● É É É H VOL CH MUTE - TV VOL + ∞ § REC MODE PLAY MODE 9 2; DISC DISPLAY T/C TIMER EDIT CLEAR RETURN SURR. SUBWOOFER TREBLE REAR BASS LOUDNESS VOICE NIGHT The DVD recorder system automatically detects if a surround sound is available and displays the type of signal: ➜ D D: Dolby Digital, ➜ DTS: DTS Digital Surround, ➜ D PL: Dolby Pro Logic, ➜ MPEG: MPEG multichannel.
Surround sound/Various 1 Press AUDIO MENU to enter the audio menu. ➜ EFFECTS is displayed on the DVD recorder system. Demo mode English Adjusting 3D Surround and Natural Surround The demo mode demonstrates various features of the DVD recorder system and will start automatically. If your DVD recorder system has a demo mode, you may wish to deactivate it. 2 Press 2. 3 Press 4 repeatedly to select either 3D SURR or NATURAL, then press 2.
Radio tuner English Storing radio stations You can store up to 40 preset radio stations in the memory of the DVD recorder system. REC/OTR 2 DVD/MON TV CAM 1/2 CD CDR/TAPE VCR/GAME 1 2 3 4 5 6 8 9 7 MENU ➜ ➜ É The preset number, the waveband and frequency of the current radio station appear. É É 5 Press CH+ or CH – to select the preset number from which onwards the found radio stations will be stored. H VOL AUTO INST is displayed. 4 Press 2.
Radio tuner SELECT AUDIO 0 DISC If you are listening to an FM radio station with a weak signal, you may wish to switch from stereo to mono for better sound quality. OK É SYSTEM Switching between mono and stereo radio reception 9 MENU É ● While TUNER is selected, press TUNER repeatedly to select FM MONO. ➜ = disappears from the display of the DVD recorder system. 0 To switch back to stereo reception, press TUNER repeatedly to select FM STEREO.
Playback 1 Switch your TV set on. If necessary set the TV to the English Loading discs correct audio/video channel for the DVD recorder system. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc..These channels are often near channel 00. 2 Load a DVD-Video disc in the tray. 3 If playback does not start automatically, press PLAY/PAUSEÉÅ to start playback.
Playing a (Super) Video CD 1 Load a (Super) Video CD in the tray. 2 Press PLAY/PAUSEÉÅ. 5 Press 2 on the remote control to confirm the selection. 6 Press 4 or 3 on the remote control as often as necessary Playback starts. to select the line PBC. PBC (Playback Control) Some (Super) Video CDs may be equipped with the special function PBC, which provides additional features. Check the disc case for details. PBC appears in the menu only if a PBC-compatible (Super) Video CD is inserted.
Playback English Playing an audio CD 1 Load an audio CD in the tray. ➜ ➜ ➜ Playback starts automatically. If the TV set is switched on, the audio CD screen appears. The current track number and its elapsed playing time are displayed. 2 Press STOP 9 to stop playback. ➜ The total number of tracks and the total playing time are displayed. Some words about MP3 The music compression technology MP3 (MPEG I Audio Layer-3) allows you to record up to 10 hours of CD-like quality music on a single CDR(W).
Selecting a title/chapter Searching If a disc contains more than one title or chapter, you can select them during playback. However, if a title contains several chapters, selecting is only possible within these chapters. Another title has to be selected then directly via the menu bar. You can search in forwards or backwards direction with different speeds.
Playback features English L Searching by keying in a time Repeating a specific sequence (not on MP3-CDs) This function allows you to choose a specific position of the playing time where playback is started. You can mark a specific sequence within a title/chapter for repeating. 1 Press SYSTEM MENU on the remote control during playback to enter the system menu. ➜ The system menu bar appears. 8 7 2 Press 1 or 2 on the remote control as often as necessary until L is selected.
Still picture ● 0 Slow motion Press PLAY/PAUSEÉÅ during playback to pause playback. ➜ The still picture is shown. 1 Press PLAY/PAUSEÉÅ during playback to pause playback. To resume playback press PLAY/PAUSEÉÅ again. 2 Keep 4 or ¢ pressed on the remote control during ➜ playback to switch to slow motion in backwards or forwards direction. ➜ Playback is started in slow motion. I Frame by frame playback 8 7 9 MENU SELECT AUDIO 0 DISC 0 OK É SYSTEM 0 É The still picture is shown.
Playback features English G Zoom F Camera angle This function allows you to enlarge the video picture and to pan through the enlarged picture. Some DVDs contain scenes recorded from different camera angles. In this case you can select among the different angles. 1 Press ÉÅ on the remote control during playback. ➜ 1 Press ÉÅ on the remote control during playback. The still picture is shown.
D Changing the audio language E Subtitles DVD-Video discs are often recorded in different languages. This means, you can watch the same movie in e.g. French, Spanish, etc..You can change the language via the system menu. However, depending on the type of DVD-Video disc the change you made may not be effective. If this happens change the language via the disc menu (see “Disc menu” in chapter “Playing a DVD-Video disc”). DVD-Video discs are often provided with subtitles in different languages.
Recording English Copyright protection When you try to record copy protected material from an external appliance, COPY PROT will be displayed. No recording is possible then. This product incorporates Macrovision copyright protection technology that is protected by US patent no. 4631603, 4577216 and 4819098, as well as other intellectual property rights.
If you want to record from another additional appliance, press on the remote control either: SAT: to record from a connected satellite receiver. CAM1/2: to record from a connected video camera. Press the button repeatedly to toggle between camera 1 (analogue input) and camera 2 (digital i-link input). VCR/GAME: to record from a connected video cassette recorder or a game console. Press the button repeatedly to toggle between video cassette recorder and game console.
Recording English Safe record When you start recording on a DVD+RW disc by pressing RECORD on the DVD recorder system or REC/OTR on the remote control once, a recording will be made from the current position.To prevent this you can do a safe record, which means starting the recording at the end of all existing recordings. ● Keep REC/OTR on the remote control pressed until SAFE RECO is displayed. ➜ Recording starts at the end of all existing recordings.
Selecting the recording mode English Recording Selecting the recording mode via the menu You can also select the desired recording mode via the system menu. By selecting a recording mode, you determine the picture quality of recordings and the maximum of possible recording time on a disc. 8 7 1 Switch your TV set on. If necessary set the TV to the 9 MENU SELECT AUDIO 0 DISC correct audio/video channel for the DVD recorder system.
Recording 7 Use 1 or 2 on the remote control to select EXT2. English Automatic recording from a satellite receiver 0 This feature can be used only if you own a satellite receiver that can control other appliances via a scart cable and a programming feature (timer). For more information, please see the instruction manual of the satellite receiver. To switch off automatic recording from a satellite receiver use 1 or 2 on the remote control to select Off.
Direct Record When you are watching a TV programme with the DVD recorder system switched to standby you can instantly start recording the current TV channel if the function Direct Record is switched on. If the status light INSTANT - RECORD lights up, recording can be started without any delay. If it does not and you start recording, please note that the system takes about 20 seconds to start the recording. Switching Direct Record on or off 1 Switch your TV set on.
Timer recording English Timer recording allows you to automatically start and stop a recording at a later date.The DVD recorder system switches to the right programme number and starts recording at the time entered. You can pre-programme up to 6 recordings within a period of one month.
Notes: If ShowView number wrong is displayed, the keyed in ShowView® programming number is incorrect. Check time and date on the DVD recorder system. Repeat your entry correctly or end programming by pressing SYSTEM MENU. If Please enter programme number is displayed, the programme number of the TV channel has not yet been allocated to the ShowView® programming number. Select the appropriate programme number of the TV channel using 1, 2 or the numerical keys on the remote control and confirm by pressing OK.
Timer recording 1 Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. 2 Press DVD/MON on the remote control as often as necessary to see the currently selected TV channel. ➜ The currently selected TV channel is displayed.
Checking, changing or deleting a timer recording 2 TV CAM 1/2 CD SAT TUNER 2 3 4 5 6 8 7 7 Press TIMER on the remote control to end. 8 Press 2 on the remote control to switch off the OK É SYSTEM Press OK on the remote control to start deleting. Timer Cleared is displayed briefly, the programmed recording data disappear and are replaced by -----. ➜ SELECT AUDIO 0 DISC If you want to delete the timer recording: Press CLEAR on the remote control. ➜ Clear timer is displayed.
Advanced features English Editing the name of the recording Erasing an entire recording/title After the recording has been made, you can change the name of the recording. You can erase an entire recording/title from a DVD+RW or an unfinalised DVD+R.The position of a deleted title on a DVD+RW can be used for a new recording. However, a deleted title on a DVD+R is only marked as deleted, but not physically deleted.
Disc info screen (DVD+R, DVD+RW discs only) Changing the disc name (DVD+R, DVD+RW discs only) You can use the disc info screen for the following proceedings: – Changing the disc name – Activating or deactivating the write protection – Making edits compatible for other DVD players – Finalising DVD+R discs – Erasing DVD+RW discs 1 Press STOPÇ when playback is stopped or press How to display the disc info screen 4 Press 2 on the remote control. DISC MENU on the remote control during playback.
Advanced features English Activating or deactivating the write protection (DVD+R, DVD+RW discs only) You can prevent a recording on a DVD+RW disc from accidental erasure by protecting it. However, the protection can be activated for the entire disc only. An individual recording cannot be protected. DVD+R discs can be protected the same way as DVD+RW discs as long as they are not finalised. 1 Press STOPÇ when playback is stopped or press DISC MENU on the remote control during playback.
Advanced features Finalising is a simple process that completes the recording of a DVD+R disc necessary to play it on a standard DVD player. DVD+R discs are “locked” once they are finalised. No further recordings or erasure can be made. 1 Press STOPÇ when playback is stopped or press DISC MENU on the remote control during playback. 2 Press 3 on the remote control as often as necessary until you reach the first title of the disc menu.
Advanced features Deleting chapter markers In this menu, you can adjust a title to your personal preferences. You can select a new index screen or split the title.You can also insert or delete chapter markers and hide chapters, which can be helpful for cutting of scenes or searching more quickly through your DVD+R or DVD+RW disc. You can delete particular chapter markers or all chapter markers within a title. During playback you can set and erase chapter markers.
You can hide chapters (e. g. commercials) during playback and make them visible again. For DVD+R discs, this function will only work when the disc is played on this DVD recorder system.When the DVD+R disc is played on a standard DVD player, hidden chapter markers will still be shown. Playing the entire title including hidden chapters If you have hidden certain chapters of a title, this feature enables you to watch the entire title including the hidden chapters.
Advanced features English Changing the index picture The first picture of your recording is automatically used as the index picture.You can, however, choose any picture from the recording as the index picture. 8 7 9 MENU You can divide a title into several parts. Each new part will become a new title with its own index picture.
6 Press 2 on the remote control to confirm the selection. 7 Press 4, 3 on the remote control as often as necessary to You can set following personal user preferences on the DVD recorder system: – t Picture – u Language – w Features – x Remote control settings – z Record settings – y Installation select the desired function. 8 Press 2 on the remote control to confirm the selection. 9 Press 4, 3 on the remote control as often as necessary to select the desired setting.
User preferences 7 Press 4, 3 on the remote control as often as necessary to English u Language 8 7 9 MENU OK É SYSTEM Audio language The audio language for playback can be chosen. SELECT AUDIO 0 DISC select the desired function.You can choose following functions: É Subtitle The subtitle language can be chosen. É É Menu The language for the screen menu can be chosen. H VOL Country The country where the DVD recorder system is used can be chosen.
User preferences correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. 2 Press SYSTEM MENU on the remote control. ➜ The system menu bar appears. 3 Press 1 on the remote control as often as necessary until A is selected. 4 Press 4 on the remote control to confirm. 5 Press 4 or 3 on the remote control as often as necessary until w Features is selected.
User preferences 8 Press 1, 2 on the remote control as often as necessary to English z Record settings select the desired setting.You can choose as follows: 8 7 9 MENU 0 DISC OK É SYSTEM Record mode See “Selecting the recording mode via the menu” in chapter “Selecting the recording mode”. SELECT AUDIO É Direct Record See separate chapter “Direct Record”. É É Sat record See separate chapter “Automatic recording from a satellite receiver”.
14 Press OK on the remote control to confirm the selection. Child lock (DVD-Video discs, (Super) Video CDs, DVD+R discs, DVD+RW discs only) This feature enables you to lock discs for children. If a child locked disc is loaded, it can only be played if a 4-digit code (pincode) is entered. In addition you can choose if the loaded child locked disc can be played always or only once. 1 Activating and deactivating the child lock Switch your TV set on.
Access control Activating and deactivating the filter function REC/OTR 2 DVD/MON TV CAM 1/2 CD SAT TUNER CDR/TAPE VCR/GAME 1 2 3 4 5 6 8 9 7 MENU SYSTEM 0 É DISC É SELECT AUDIO OK É É H 1 Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. 2 Press 2 to switch on the DVD recorder system.
Access control The set filter values depend on the respective country. Therefore it is necessary to enter the country in which you live. 1 Switch your TV set on. If necessary set the TV to the 1 Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. correct audio/video channel.
Troubleshooting English WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock. If a fault occurs, first check the points listed before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre. Laser safety This unit employs a laser.
Problem Solution Does not play back – – – – – – – – – Make sure there is a recording on the disc. Make sure the disc is not scratched or dirty. Replace or clean the disc. Make sure the disc has been inserted, printed side up. Check if the right disc type has been inserted: DVD-Video disc, DVD-R(W), (Super) Video CD, Audio CD, CDR(W), MP3-CD or DVD+R(W) Make sure the region code of the DVD disc matches the DVD recorder system. Parental Control is switched on, see chapter “Access control”.
Troubleshooting English 64 Problem Solution The picture is distorted or black-and-white during playback – The TV system of the inserted disc does not match the TV system of your TV (PAL/NTSC). – Switch the following setting in the system menu: t Picture - SCART video - switch to RGB No sound signal at the digital output – Check if the sound settings match the selected inputs and the connected additional appliances. – If you inserted an MP3-CD, the digital output is switched off during playback.
English Troubleshooting Problem Solution COPY PROT is displayed – The video source (DVD, video tape, …) from which you want to record, is copy protected. Recording is not possible. Does not record – The desired TV channel for recording is not stored or a wrong programme number (channel number) has been selected. Check the TV channels stored. – The inserted disc is write protected. Remove the write protection or load another non write protected disc. – An already finalised DVD+R disc has been inserted.
English Meet Philips at the Internet http://www. philips.com W LX9000R CLASS 1 LASER PRODUCT 3103 306 1916.